Applied Concepts Inc ACMI006 Manuale Utente

28 

The S 

 offers several performance characteristics which can be formatted from the “menu setup.” Below 

are some of these features. If your radar does not have a feature listed below and you would like it incorporated, please 
contact Applied Concepts, Inc. at 1-800-S or your Factory Sales Representative. 

•  S 

 can be interfaced with most In-Car Video systems, computers, printers, etc. The “menu” offers a 

variety of pre-programmed baud rates; 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200. 

•  Message format can be selected for displaying on video systems, computer, printer, etc. 
•  Minimum Stationary speed display can be selected to start at either 2 mph or 12 mph. Factory setting is 12 mph. 
•  Various “locking” options can be selected. Normal Factory setting is both Target and Patrol. Speeds are locked with 

the Locked key depressed. Some states have other requirements. The unit is factory set for your state requirements. 
Choices are Lock only Target Speed; Lock neither Target nor Patrol Speeds, and Automatically Clears Lock within 15 
minutes. 

•  The Harmonic Suppression indicator is a decimal point in the Target window. It lights up when double suppression is 

suppressing the target display. This is turned off in the normal factory setting. 

•  Faster Speed Tracking comes standard with all S 

. This feature can be disabled if not desired. 

•  Audio loudness can be set for High or Low. All switch displays are set on High. All non-switch displays are set on 

Low. 

•  The S 

 can be set to be utilized as only a stationary radar. 

•  Selecting speed readings in miles or kilometers per hour is a menu selectable feature. 
•  Either one or two antenna operation can be selected. Factory setting is for two antennae unless specified on the order. 

This allows for easy upgrade to a dual antenna. 

•  For Michigan customers, there is a special sensitivity (range) setting: the radar allows settings of 0 through 4 instead of 

the normal 1 through 4 selections. 

Other menu selections are preset at the factory. We encourage all menu selections to be done by the factory, by factory 
authorized service centers, or factory sales agents.