Applied Concepts Inc ACMI007 Manuale Utente
Applied Concepts 011-0131-00 rev 2
Page 6
PERFORMANCE SPECIFICATIONS
Stationary Speed Range
Max target speed: 200 MPH (321 km/h)
Min target speed: Configurable to ~1 or 12 MPH (~1.5 or 19 km/h)
Refer to Stationary Low Cutoff (Setting 7) in Appendices C and D
Vehicle speed
Max vehicle speed for acquisition: 90 MPH (144 km/h)
Max vehicle speed track after acquisition: 199 MPH (320 km/h)
Min vehicle speed for acquisition: Configurable to 5 or 20 MPH (8 or
32 km/h)
Refer to Vehicle Low Cutoff (Setting 8) in Appendices C and D
* The Speedometer Speed Sensor has low-speed capabilities which
allow it to see vehicle speeds down below 1 MPH (1.6 km/h) on the
low setting
Opposite lane target speed
Maximum combined closing speed: 200 MPH (321 km/h)
For 5 MPH (8 km/h) vehicle speed: 20 to 195 MPH (32 to 313 km/h)
For 70 MPH (112 km/h) vehicle speed: 35 to 130 MPH (56 to 209
km/h)
Min target speed: Configurable to ~1 or 12 MPH (~1.5 or 19 km/h)
Refer to Stationary Low Cutoff (Setting 7) in Appendices C and D
Vehicle speed
Max vehicle speed for acquisition: 90 MPH (144 km/h)
Max vehicle speed track after acquisition: 199 MPH (320 km/h)
Min vehicle speed for acquisition: Configurable to 5 or 20 MPH (8 or
32 km/h)
Refer to Vehicle Low Cutoff (Setting 8) in Appendices C and D
* The Speedometer Speed Sensor has low-speed capabilities which
allow it to see vehicle speeds down below 1 MPH (1.6 km/h) on the
low setting
Opposite lane target speed
Maximum combined closing speed: 200 MPH (321 km/h)
For 5 MPH (8 km/h) vehicle speed: 20 to 195 MPH (32 to 313 km/h)
For 70 MPH (112 km/h) vehicle speed: 35 to 130 MPH (56 to 209
km/h)
Moving Speed Range
Same lane target speed
Min/Max target speed: vehicle speed ±70%
Also, no targets seen within ±5 MPH (±8 km/h) of vehicle speed.
Vehicle speed must be greater than 16 MPH (25 km/h)
Min/Max target speed: vehicle speed ±70%
Also, no targets seen within ±5 MPH (±8 km/h) of vehicle speed.
Vehicle speed must be greater than 16 MPH (25 km/h)
Accuracy
+/- 0.3%
In ones resolution, speeds are rounded down to nearest integer.
In tenths resolution, speeds are rounded down to nearest tenth.
Refer to Unit Resolution (Setting 21) in Appendices C and D
In ones resolution, speeds are rounded down to nearest integer.
In tenths resolution, speeds are rounded down to nearest tenth.
Refer to Unit Resolution (Setting 21) in Appendices C and D
Audio Output
A 3.3 Vpp pulse-width modulated (PWM) audio output signal is
provided for Doppler audio and status beeps – must be filtered and
amplified for best audio quality.
Only available on Stationary and Traffic Speed Sensor models.
provided for Doppler audio and status beeps – must be filtered and
amplified for best audio quality.
Only available on Stationary and Traffic Speed Sensor models.
Speed Alarm Output
With speeds below the Alarm Threshold, the Aux pin output is 0V.
With speeds at or above the Alarm Threshold, the Aux pin is 3.3V and
can drive 10mA.
With speeds at or above the Alarm Threshold, the Aux pin is 3.3V and
can drive 10mA.
Automatic Self Test
Performed every 10 minutes (default) while transmitting.
Refer to Auto Test Period (Setting 52) in Appendix D to change the
period in the range from 30 seconds to 15 minutes.
Refer to Auto Test Period (Setting 52) in Appendix D to change the
period in the range from 30 seconds to 15 minutes.