Hitec RCD Inc. SPEC-24DS Manuale Utente

SPECTRA 2.4DS: 2.4GHz DSSS Module Spec & Features

  SPECTRA 2.4DS 

Frequency 

Output 

Stock No.

    US Bandwidth 

2.403GHz~2.476GHz 

18dBm 

28724

   Japan Bandwidth 

2.403GHz~2.476GHz 

10dBm 

xxxxx

  Europe Bandwidth 

2.403GHz~2.476GHz 

10dBm 

xxxxx

  France Bandwidth 

2.454GHz~2.476GHz 

10dBm 

xxxxx

 

Model Name 

Size 

Weight 

Stock Number

 

ATOM 3 

1.18 x 0.79 x 0.47in (30 x 20 x 12mm)  0.23oz(6.5g) 

29324

Thank  you  for  your  purchase  of  the  Hitec  Direct  Sequence  Spread  Spectrum  or 

DSSS,  2.4GHz  surface  module  and  receiver  system.  This  manual  contains  the 

complete  directions  on  how  to  use  the Atom3  3  channel  surface  receiver.  We 

encourage you to review the entire manual before using these products.

Help is available from the Hitec office through phone support and e-mail inquiries. 

Our US office is generally open Monday thru Friday, 8:00AM to 4:30PM PST. 

These hours and days may vary by season. Every attempt is made to answer every 

incoming service call. Should you get voice mail, leave your name and number and 

a staff member will return your call..

Make plans to visit the Hitec website, www.hitecrcd.com, on a regular basis. Not only 

is it full of specs and other information about the entire Hitec product line, our FAQ 

pages  will  eventually  hold  valuable  information  and  program  update  about  the 

Spectra 2.4DS module and Atom 3 receiver.

One of the benefits of the extensive R/C online community is the vast wealth of 

archived knowledge available.

Hitec sponsors forums on most of the popular R/C web sites where a Hitec staff 

member or representative tries to answer all manner of product related questions. 

Bringing  together  strangers  with  common  interests  is  proving  to  be  one  of  the 

greatest gifts of the internet. If past history is any guide to the future, we are certain

forums will be started about the Hitec 2.4 system and several are certain to stand out 

as valuable archives of information

All Hitec products carry a two year from date of purchase warranty against manufac-

tures defects. Our trained and professional service representative will determine if 

the item will be repaired or replaced. To provide all the necessary information we 

need  to  administrate  your  repair,  visit  our  website  at  www.hitecrcd.com  and  

download the repair form, fill it out and send in your item for repair.

Func. Button

LED

Channel & Battery Port

Antenna

1. The receiver antenna should not be placed near the engine, metal parts,

   or high current batteries.

2. The receiver Antenna should not get damaged. 

  To prevent antenna damage, do not install the antenna near the sharp

  edge or bend it more than 90 degree in angle.

3. Use a Velcro or think double sided tape to install to absolve the shock

  during the operation.

4. When LED indicator irregularly blinks, indicates unstable frequency

  environment, stop operating and look for the possible cause of problems.

LED

Func. Button

Antenna

1. Function/Link Button
  Button for Link (ID-Setting)
2. LED Status Indicator
  Indicates current status of module
3. Antenna
     2.4GHz Rubber duck Antenna

  

Operating  Voltage:  Rechargeable  four  to  six  cell  NiMH,  NiCd,  or  LiPo  batteries 
(4.8~7.4V). From the receiver battery power or speed control (ESC) power. Select 
the suitable voltage depends on the servos capability.
Current Consumption: 40mA

1. Function Button
-  Used  for  linking  the  receiver  to  a  module  and  entering  the  FAIL-SAFE  or  Hold 
feature.

2. RED LED Status Indicator
- Indicates the set-up process codes and current status of Atom 3.
- Frequency environment indication feature: when the reception is bad the red LED 
irregularly blinks. 

3. Channel Output and Battery Input Ports
- The ports for battery, servos and other accessories 

Compatibility
-  The Atom3  receiver  is  compatible  with  transmitters  using  the  Hitec  DSSS  2.4 
system
Spectra 2.4DS module or future dedicated built-in DSSS 2.4 Hitec transmitters.