Scosche Industries IPRFC Manuale Utente

Press and HOLD this

button to scroll 

volume up 

Press and release

this button to move

track BACKWARDS.

Press and HOLD this

button to rewind

through the track

Press and HOLD this

button to scroll 

volume down 

Press and release  to toggle between Pause and Play.*  Press and

HOLD for 2 full seconds to put the iPOD into sleep mode.

Press and release

this button to move

track FORWARD.

Press and HOLD this

button to forward

through the track.

The iJET was designed to provide maximum control of your iPOD from

anywhere you choose to place it regardless of whether it is in your

backpack at school or hundreds of feet away in a different room 

connected to your home stereo.

Plug the iJET into the top of your iPOD and WAIT 30 seconds. A self

diagnostic will automatically run and your wireless remote will be

ready for operation within 30 seconds. Plug in your ear buds, speakers

or connect to your home stereo through a set of RCA jacks (supplied in

some iJET kits). The connection of ear buds, RCA jacks or stereo wire is

imperative for optimum performance since the iJET uses this plugged

in wire as an antenna (Patent Pending) for maximum range. 

Program up to 10 iJET remotes into any receiver. Place an iJET remote

in each bedroom, out by the pool or anywhere you choose to control

your music. Part Number iJET-Remote.
Belt Clip:

The optional Belt clip is perfect for the mobile iPOD user. It easily clips

to your belt, Backpack strap, purse or anywhere you desire to keep

track of your iJET remote control. The remote easily snaps into the belt

clip for maximum flexibility. Part Number iJET-Belt

For iPOD personalization you can purchase optional matching color

remote and receiver cases. Simply snap off the top cover of the iJET

remote and the receiver’s face plate. Snap on a new metallic remote

face on both the remote and receiver (Packaged together). The 

package comes complete with all iPOD mini color configurations. 

The iJET uses an advanced power down mode which minimizes current

draw on your iPOD battery if you are not connected to a constant

power source. After 20 minutes of sensing no music playing or no

remote commands being sent, the iJET goes into an advanced battery

save mode. The iJET receiver will automatically re-power itself when it

detects music playing (If there was none before) or it sees a remote

button being pressed for more than .6 seconds.  

Toll Free 888-869-4737

1185 Park Center Drive • Vista, CA 92081

www.abtech2.com

OPTIONAL iJET ACCESSORIES continued:

This dual function stand is the perfect option for your iPOD because it

is both fully functional and decorative. It props the iPOD upright on

your stereo system, television or wherever you choose to place it mak-

ing viewing of the LCD screen easy as well as keeping the IJET upright

for maximum reception of the remote. The top section can be removed

if you are not using the iPOD charger or place it in the base to hide

the charger plug, ear buds or any other small iPOD accessory. 

OPERATION continued:

Press and HOLD this

button to scroll 

volume up 

Press and release

this button to move

track BACKWARDS.

Press and HOLD this

button to rewind

through the track

Press and HOLD this

button to scroll 

volume down 

Press and release  to toggle between Pause and Play.*  Press and

HOLD for 2 full seconds to put the iPOD into sleep mode.

Press and release

this button to move

track FORWARD.

Press and HOLD this

button to forward

through the track.

The iJET was designed to provide maximum control of your iPOD from

anywhere you choose to place it regardless of whether it is in your

backpack at school or hundreds of feet away in a different room 

connected to your home stereo.

Plug the iJET into the top of your iPOD and WAIT 30 seconds. A self

diagnostic will automatically run and your wireless remote will be

ready for operation within 30 seconds. Plug in your ear buds, speakers

or connect to your home stereo through a set of RCA jacks (supplied in

some iJET kits). The connection of ear buds, RCA jacks or stereo wire is

imperative for optimum performance since the iJET uses this plugged

in wire as an antenna (Patent Pending) for maximum range. 

Program up to 10 iJET remotes into any receiver. Place an iJET remote

in each bedroom, out by the pool or anywhere you choose to control

your music. Part Number iJET-Remote.
Belt Clip:

The optional Belt clip is perfect for the mobile iPOD user. It easily clips

to your belt, Backpack strap, purse or anywhere you desire to keep

track of your iJET remote control. The remote easily snaps into the belt

clip for maximum flexibility. Part Number iJET-Belt

For iPOD personalization you can purchase optional matching color

remote and receiver cases. Simply snap off the top cover of the iJET

remote and the receiver’s face plate. Snap on a new metallic remote

face on both the remote and receiver (Packaged together). The 

package comes complete with all iPOD mini color configurations. 

The iJET uses an advanced power down mode which minimizes current

draw on your iPOD battery if you are not connected to a constant

power source. After 20 minutes of sensing no music playing or no

remote commands being sent, the iJET goes into an advanced battery

save mode. The iJET receiver will automatically re-power itself when it

detects music playing (If there was none before) or it sees a remote

button being pressed for more than .6 seconds.  

Toll Free 888-869-4737

1185 Park Center Drive • Vista, CA 92081

www.abtech2.com

OPTIONAL iJET ACCESSORIES continued:

This dual function stand is the perfect option for your iPOD because it

is both fully functional and decorative. It props the iPOD upright on

your stereo system, television or wherever you choose to place it mak-

ing viewing of the LCD screen easy as well as keeping the IJET upright

for maximum reception of the remote. The top section can be removed

if you are not using the iPOD charger or place it in the base to hide

the charger plug, ear buds or any other small iPOD accessory. 

OPERATION continued:

This device complies with part 15 of the FCC rules.  Operation is subject to the following two conditions.
1)•This device may not cause harmful interference, and
2)•This device must accept any interference received, including interference that may cause undesired operation.

Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part responsible for 
compliance could void the user’s authority to operate the equipment.

We are a one way device.  Our self 
diagnostic is internal, and we can only 
send commands to the IPOD.  This is 
done via a Open Collector bus with a 
baud rate of 19.2K.