Audiotel International Limited 2-400-0001 Manuale Utente

AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)

ETECT

IV User Manual

AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)

ASIC

PERATING

METHODOLOGY

The basic operating method for using the

ETECT

IV follows three sequential steps.

DETECT

With the

ETECT

IV displaying either the Main menu or the Detect display (Select DETECT

from the main menu) move the

ETECT

IV unit around the area to be secured.

Note

ETECT

IV is intended to find suspicious devices within a target area. To avoid

excessive interference the sensors are optimised to limit the range at which
devices are detected. To search effectively the search head needs to pass closely
to all possible hiding places.

The DETECT mode utilises all the

ETECT

IV detectors simultaneously and should ensure that,

as the unit search head is swept over areas of likely concealment, the opportunities for detecting
a target are maximised.

When a large response is noted from one or more of the detectors it can be investigated further
using the Identify features for the appropriate detector.

IDENTIFY

The IDENTIFY stage involves using the various tools built into each one of the

ETECT

detectors to try and identify whether or not the detected response is a possible threat.

If it seems likely that the detected response is a threat then the unit can move into the LOCATE
mode.

LOCATE

The LOCATE stage involves moving the

ETECT

IV around the suspect area using both the

display and the audio output to locate the source of the detected response.