Garmin International Inc 01393 Manuale Utente
Astro Dog Tracking System Owner’s Manual
Appendix
Connecting your Astro 220 to a Computer
Before connecting your Astro 220 to a computer, install
the USB drivers contained in the MapSource Trip
& Waypoint Manager software that came with your
Astro 220. Follow the instructions for installation and
operation provided with the software.
Information about USB Drivers
The USB drivers are installed when you install the
MapSource Trip and Waypoint Manager software. When
you initially connect the Astro 220 to a USB port, your
computer might prompt you to locate the destination
of the drivers for the device. After the drivers are
installed, your computer detects your Astro 220 when it
is connected. Periodically check
updated drivers.
To connect your Astro 220 to your computer:
1. Insert the smaller connector on the USB cable into the
USB port on the back of your Astro 220.
2. Connect the other cable end to a USB port on your
computer.
Transferring Data to a microSD Card
Some of the Astro 220 navigation features require
detailed mapping data, and you may decide to purchase
and transfer detailed maps. A microSD card (not
included) can be loaded with detailed maps from optional
MapSource disks to enhance your Astro 220 System.
With detailed MapSource mapping data, you can view
listings of nearby restaurants, lodging, shopping centers,
attractions, and entertainment, and you can retrieve
addresses and phone numbers for any listed location. To
achieve the best terrain details when hunting, use Garmin
U.S. Topographic maps.
The amount of data transferable is limited to the capacity
The amount of data transferable is limited to the capacity
of the microSD card.
Map-data transfer requires installation of Trip and
Map-data transfer requires installation of Trip and
Waypoint Manager and the USB Interface Cable
to transfer MapSource data from a computer to the
microSD card in the Astro 220. To transfer other data
to the microSD card, use the USB Mass Storage feature
explained on
.