Garmin International Inc 03260 Manuale Utente

Select a waypoint.

Select OPTIONS > SEND.

On your computer, install Garmin Express

™

 (

). On your smartphone, install the Garmin Connect 

Mobile app.
This provides easy access to these services for Garmin devices:
• Software updates
• Data uploads to Garmin Connect
• Product registration

Connect the device to your computer using a USB cable.

Go to 

.

Follow the on-screen instructions.

• Frequently sync the device to your Garmin Connect account:

◦ Connect your device to a computer using the USB cable 

and the Garmin Express application.

◦ Sync your device to the Garmin Connect Mobile app using 

your Bluetooth enabled smartphone.

While connected to your Garmin Connect account, the device 

downloads several days of satellite data, allowing it to quickly 

locate satellite signals.

• Take your device outside to an open area away from tall 

buildings and trees.

• Remain stationary for a few minutes.

You can do several things to extend the life of the batteries.
• Use premium batteries.
• Reduce the backlight timeout (

).

• Turn off the beeper (

).

• Turn off the compass when not in use (

).

You can change the device language selection if you have 

accidently selected the wrong language on the device.

From the menu page, select   three times.

Select ENTER.

Select   five times.

Select ENTER.

Select   four times.

Select ENTER.

Select your language.

You can reset the device if it stops responding. This does not 

erase any of your data or settings.

Hold POWER for 10 seconds.

You can reset all settings back to the factory default settings.

From the menu page, select SETUP > RESET > RESTORE 

DEFAULTS > YES.

AMB PRESS: The uncalibrated ambient pressure.
AVG ASCENT: The average vertical distance of ascent since 

the last reset.

AVG DESCNT: The average vertical distance of descent since 

the last reset.

BAROMETER: The calibrated current pressure.
BEARING: The direction from your current location to a 

destination. You must be navigating for this data to appear.

CADENCE: Cycling. The number of revolutions of the crank 

arm. Your device must be connected to a cadence accessory 

for this data to appear.

COURSE: The direction from your starting location to a 

destination. Course can be viewed as a planned or set route. 

You must be navigating for this data to appear.

ELEVATION: The altitude of your current location above or 

below sea level.

FINAL DEST: The last point on the route or course.
FINAL DIST: The remaining distance to the final destination. 

You must be navigating for this data to appear.

FINAL ETA: The estimated time of day when you will reach the 

final destination (adjusted to the local time of the destination). 

You must be navigating for this data to appear.

FINAL ETE: The estimated time remaining until you reach the 

final destination. You must be navigating for this data to 

appear.

GLIDE RATIO: The ratio of horizontal distance traveled to the 

change in vertical distance.

GR DEST: The glide ratio required to descend from your current 

position to the destination elevation. You must be navigating 

for this data to appear.

HEADING: The direction you are moving.
HEART RATE: Your heart rate in beats per minute (bpm). Your 

device must be connected to a compatible heart rate monitor.

MAX ASCENT: The maximum rate of ascent in feet per minute 

or meters per minute since the last reset.

MAX DESCNT: The maximum rate of descent in meters per 

minute or feet per minute since the last reset.

MAX ELEVTN: The highest elevation reached since the last 

reset.

MAX SPEED: The highest speed reached since the last reset.
MAX TEMPE: The maximum temperature recorded in the last 

24 hours from a compatible temperature sensor.

MIN ELEVTN: The lowest elevation reached since the last reset.
MIN TEMPE: The minimum temperature recorded in the last 

24 hours from a compatible temperature sensor.

MOV'N AVG: The average speed while moving for the current 

activity.

MOV'N TIME: The total time moving for the current activity.
NEXT DEST: The next point on the route. You must be 

navigating for this data to appear.

NEXT DIST: The remaining distance to the next waypoint on the 

route. You must be navigating for this data to appear.

NEXT ETA: The estimated time of day when you will reach the 

next waypoint on the route (adjusted to the local time of the 

waypoint). You must be navigating for this data to appear.

NEXT ETE: The estimated time remaining until you reach the 

next point in your route. You must be navigating for this data 

to appear.

Troubleshooting

9