Garmin International Inc GRMNAIS600 Manuale Utente
Use these instructions to program and install the Garmin
®
AIS 600 marine Automatic Identification System (AIS) Class B transponder device.
Compare the contents of this package with the packing list on the box. If any pieces are missing, contact your Garmin dealer immediately.
WARNING
When navigating, carefully compare information provided by the unit to all available navigation sources, including information from visual
sightings, local waterway rules and restrictions, and maps. For safety, always resolve any discrepancies or questions before continuing
navigation.
Use this unit only as a navigational aid. Do not attempt to use the unit for any purpose requiring precise measurement of direction, distance,
Use this unit only as a navigational aid. Do not attempt to use the unit for any purpose requiring precise measurement of direction, distance,
location, or topography.
This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or
This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or
reproductive harm. This Notice is provided in accordance with California’s Proposition 65. See www.garmin.com/prop65 for more information.
CAutIoN
Wear safety goggles and a dust mask when drilling, cutting, or sanding.
Notice
To prevent possible damage to your equipment, the VHF antenna must be connected to the AIS 600 before transmitting. This ensures that the
power output to the antenna port dissipates properly when transmitting.
Electromagnetic Energy Exposure and Antenna Mounting
The AIS 600 generates and radiates radio frequency (RF) electromagnetic energy (EME). Failure to observe these guidelines may expose
persons to RF radiation absorption exceeding the maximum permissible exposure (MPE).
Garmin declares an MPE radius of 59 in. (1.5 m.) for this system, which was determined using 2 watts output to an omni-directional 9 dBi gain
Garmin declares an MPE radius of 59 in. (1.5 m.) for this system, which was determined using 2 watts output to an omni-directional 9 dBi gain
antenna. The antenna should be installed such that a distance of 59 in. (1.5 m) is maintained between the antenna and all persons.
When sharing the VHF antenna with a VHF radio, refer to the documentation provided with the radio for additional MPE information specific
When sharing the VHF antenna with a VHF radio, refer to the documentation provided with the radio for additional MPE information specific
to the installed VHF radio.
WARNING:
Radio operators with cardiac pacemakers, life-support machines, or electrical medical equipment should not be exposed to excessive radio-
frequency fields.
Operate the device in accordance with the instructions supplied.
Operate the device in accordance with the instructions supplied.
Notice
The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices.
Check with the local authorities for any antenna or operational restrictions that may apply.
Check with the local authorities for any antenna or operational restrictions that may apply.
Safe Compass Distance
Ensure that you install the AIS 600 transceiver box at least 15
3
/
4
in. (40 cm) from any compass. Test your compass to verify that it operates
correctly when the device is operating.
Licensing Requirements
In many countries, the operation of an AIS device is included in the VHF license provisions. Therefore, the vessel on which the AIS 600 is
installed must possess a current VHF license that lists the AIS system, the vessel Call Sign, and the vessel MMSI number. Contact the relevant
authority in your country to ensure that your VHF license covers the AIS 600 device.
AIS 600 Instructions
December 2009
190-01151-00
Rev. B
Printed in Germany