Davis Instruments DWW6326 Manuale Utente
Tools for Installation
Page 3
The hardware shown here is provided for assembly and mounting:
Additional Components on Vantage Pro Plus
Vantage Pro Plus
includes an ultravio-
let (UV) sensor and a solar radiation
sensor. These two sensors are mounted
next to the rain collector on your ISS.
sensor. These two sensors are mounted
next to the rain collector on your ISS.
Note: Please make every effort when handling
your ISS not to touch the small white dif-
fusers on top of the UV and solar radia-
tion sensors. Oil from the skin will reduce
their sensitivity. Clean the diffusers using
ethyl alcohol on a soft cloth (NOT rub-
bing alcohol). The solar radiation sensor
may also be cleaned with soap and water.
fusers on top of the UV and solar radia-
tion sensors. Oil from the skin will reduce
their sensitivity. Clean the diffusers using
ethyl alcohol on a soft cloth (NOT rub-
bing alcohol). The solar radiation sensor
may also be cleaned with soap and water.
Tools for Installation
Refer to this section in your ISS Installation Manual.
Preparing the Anemometer
Refer to this section in your ISS Installation Manual.
1/4" Flat Washers
1/4" Lock Washers
1/4" Hex Nuts
U-Bolts
Nut Plate
.05"
Allen Wrench
1/4" x 3" Lag
#4 x 1-1/8"
Machine Screw
#4 Tooth
Lock Washer
#4 Flat
Washer
Washer
#4-40
Hex Nut
UV and
Solar
Radiation
Sensors
Solar
Radiation
Sensors
Sensor
Mounting
Arms
Mounting
Arms
Vantage Pro Plus ISS