Marson Technology Co Ltd MT100A Manuale Utente

GETTING STARTED

CHARGING THE BATTERY

To scan a barcode, make sure the aiming beam crosses

every bar and space of the barcode.

1. Flip open the mini USB port on the scanner.

2. Insert the mini USB connector into the port on the

    scanner and USB A connector into a USB port on

    the host PC.









- 5 -

- 6 -

Scanner

Mini USB

USB A

Host

BEEPER INDICATION

LED INDICATION

Off

Flashing Green

Green for 2 sec

Flashing Red

Solid Red

Standby or Power off

Disconnected or Discoverable

Good Read

Low power

Charging

Single long beep            Power up

Single beep 

             Good read

Single short beep           The scanner reads a Code39 of

                                      ASCII in configuration procedure

Two beeps 

           i. Wireless connection

                                             ii. The scanner successfully reads

 

              a configuration barcode

Two short beeps             

Good read (Batch mode/Memory mode)

Four beeps

 (Hi-Lo-Hi-Lo) 

   Out of range/Poor connection

Five beeps 

             Low power

Three beeps 

             Wireless disconnection

Three short beeps         i. The scanner reads a barcodes

 

              while disconnected.           

 

           ii. The scanner reads an unexpected

                                        barcode during configuration

                                        procedure. (scan [ABORT] to abort

                                        and start over)

Several short beeps        The scanner switches from one

 

             communication mode to another