FLIR Commercial Systems Inc. MO270X Manuale Utente
MO270-EU-EN-Temp02-11/11
2
Introduction
Congratulations on your purchase of the Extech MO270 Moisture Meter with full graphical display.
This meter includes MeterLink
TM
Bluetooth capabilities for use with FLIR infrared cameras (such as
FLIR T/B200, T/B300, T/B360, T/B400 or i/b60 cameras). The MO270 detects moisture in wood
and other materials such as particle board, carpeting, and ceiling/bathroom tiles using a non-
invasive method (pinless); the MO270 also measures moisture in sheet rock and other building
materials using the pin method. This meter is shipped fully tested and calibrated and, with proper
use, will provide years of reliable service.
Features
Detachable sensors transmit data viewable on meter display from up to 65ft (20m)
Readings from up to eight (8) remote sensors can be viewed on meter
Meter can record data from up to forty (40) remote sensors simultaneously onto SD card
Wireless sensor affixes to 4 ft (1.2m) telescoping handle; Optional longer handles available
Wirelessly transmit moisture data to FLIR IR cameras via MeterLink
TM
and Bluetooth
Wood Moisture equivalent (%WME) pin readings
Visual and audible High and Low Alarm modes
2-point calibration check built into protective cap
Includes 3.7V rechargeable Li-Polymer battery, wireless moisture sensor, external pin probe,
replacement pins, telescoping handle, AC adaptor, protective cap, 2G SD card, and hard case