Deister Electronic GmbH MODEL24W Manuale Utente

M24W Manual.doc

Model 24 W ISO-15693 Keyboard Wedge

Page 2 of 3

The keyboard and system PC connections are made through PS/2-style 6-pin

mini-DIN connectors, keyed for correct installation. The M24W 12VDC power

plug is keyed so as to require proper ± conductor orientation. The power cable

is permanently terminated at the AC power supply.

LED Control

The red LED blinks on briefly to indicate a BID has been read and sent to the PC.

The green LED is not active.

The yellow LED indicates the M24W is powered, and that the attached PC is

powered on. The yellow LED blinks off briefly to indicate a valid badge read.

Beeper Control

The beeper sounds briefly to indicate that a badge has been read.

Temperature: -20°C to +70°C (-4°F to 158°F)

Humidity: 0% to 95% humidity, non-condensing

The M24W Keyboard Wedge is a desktop unit, intended for use in-doors only.

Power on the M24W configured personal computer. Place the cursor in BID field

of the software application. Place the credential (typically a badge) on the M24W

reader. The M24W Keyboard Wedge will read the credential and format the

credential badge identification number as text, properly format the BID and send

the resulting character string to the cursor designated data entry field.

Proceed in the customary manner with creation of the badge holder record.