Deister Electronic GmbH UDL120 Manuale Utente
UDLxxx
8. Accessories
Further accessories such as necessary connection cables or peripheral devices (Connection
Box CB1, Connection Box CB2) are shortly explained in the following table and the chart
below will additionally illustrate the basic concept. For all peripheral devices mentioned below
there are separate Wiring and Installation Instructions available which can be obtained on
request from your local sales and service partner or directly at deister electronic GmbH.
Box CB1, Connection Box CB2) are shortly explained in the following table and the chart
below will additionally illustrate the basic concept. For all peripheral devices mentioned below
there are separate Wiring and Installation Instructions available which can be obtained on
request from your local sales and service partner or directly at deister electronic GmbH.
CC1 Connection cable
Art.No. 09287.000
M8 female connector 90° 4-pin with 3 m cable
PS1 Protection Set 1
Art.No. 09286.000
Steel sides for mounting the reader onto the fork
carriage; weight approx. 767 g
carriage; weight approx. 767 g
CB1 Connection Box 1
Art.No. 09284.000
Interface converter;
converts data from Host/PC on the USB bus into
RS485 signals; serves as voltage supply for the
entire RFID system by being connected to a DC/DC
converter (see below)
converts data from Host/PC on the USB bus into
RS485 signals; serves as voltage supply for the
entire RFID system by being connected to a DC/DC
converter (see below)
CB2 Connection Box 2
(for up to 5 reader)
Art.No. 09285.000
Art.No. 09285.000
Acts as RS485 hub;
serves as data transmitter from the Host/PC (via
CB1) and as voltage supply (from the CB1) for all
separately connected readers (see below)
serves as data transmitter from the Host/PC (via
CB1) and as voltage supply (from the CB1) for all
separately connected readers (see below)
Table 1: Accessories for UDL120
8.1 Basic principle of forklift application
V08/07/09
lo_udl120_io_en
17
UDL120
UDL120
UDLxxx
UDLxxx
Terminal
(3rd Party)
CB1
UDLxxx
CB2
USB
RS485
RS485
RS485
CC1
Figure 8.1.1: Basic principle of forklift application
DC/DC converter
(3rd Party)
24 V/DC