Universal Scientific Industrial Co. Ltd. CB-G-BR-02 Manuale Utente

20

•  you mis-selected a configuration profile on your wireless station and the

profile does not belong to the wireless network that you want to connect
to.

•  The Base Station(s) that provide(s) access to the selected network

has/have been configured to deny access to stations that use the value
ANY as their Network Name.

Contact your LAN Administrator for information about the correct values of the
parameter settings.

No LED Activity
If there is no LED activity on the Power LED and Link LED of the CB-G-BR
Cardbus adapter , this may be due to one of the following reasons:

•  The CB-G-BR Cardbus device is not properly connected to your computer.

•  No driver was installed to allow communication between your computer

and the wireless network interface.

•  You are using a wireless network interface in combination with a CB-G-BR

WLAN Cardbus Tools, but you did not yet introduce the device to your
computer using the Add New Hardware option on the Control Panel.

 

 

 

 

A flickering Power LED identifies that you enabled the Card Power Management
option for the Wireless Client Adapter of a Wireless Client Station (Advanced
Settings).

 
 

 

 

Subject to the type and version of your Windows operating system, the correct
protocol may or may not be installed automatically when users install the wireless
network interface. Network protocols includes TCP/IP,NetBEUI  and  IPX/SPX.

 

To verify your network protocol settings, please follow the steps:

 

1. Click Start  and then select Settings. Please select Control Panel.

 

2. Double-click the Network icon to open the Network properties window.

 

3. Display the list of network components. Install protocols for your wireless

network interface.