Universal Scientific Industrial Co. Ltd. RGX210B Manuale Utente
14
Hardware Installation
Basic Installation
2
2.4.5 Powering on the Unit
After making the necessary cable connections, attach the power cable as fol-
lows:
lows:
1.
Plug the power adaptor in to the rear DC port of the Gateway.
2.
Connect the power cable on the adaptor to a standard electrical outlet.
3.
Turn on your network devices and PC.
There is no on/off switch on the Gateway. Once the power adapter is con-
nected, the Gateway is operational.
nected, the Gateway is operational.
A diagnostic sequence occurs in which the Gateway LEDs blink for a few
seconds. The Gateway is ready for use when the LEDs stop flashing.
seconds. The Gateway is ready for use when the LEDs stop flashing.
CAUTION:
ONLY USE THE SUPPLIED DC ADAPTER TO PREVENT
DAMAGE OR PERSONAL INJURY.
!