Lexmark International Inc 5056 Manuale Utente
Loading standard trays and optional trays
67
Printing
L
e
xm
ar
ar
k Co
nf
id
en
ti
ti
al
u
n
ti
l an
no
un
ced - Re
no
un
ced - Re
vi
si
on:
02
/18
/18
/05
Loading standard trays and optional trays
Your printer has a 550-sheet standard tray. You may have also purchased one or more 550-sheet
optional
optional
trays. The steps for loading a standard or optional tray are the same.
Note: The steps for loading a 3000–sheet drawer are different than the steps for loading
a 550-sheet tray.
To load print media:
Note: Do not remove a tray when a job is printing or when the operator panel indicator
light is blinking. Doing so may cause a jam.
1
Open the tray.
2
Squeeze the side guide tab, and position the guide for the size media you are using.
3
Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the print
media. Straighten the edges on a level surface.
media. Straighten the edges on a level surface.
4
Place the print media face down in the tray. For duplex (two-sided) printing on letterhead,
place the print media face up in the tray.
place the print media face up in the tray.
Note: Do not fill paper above the load line. Overfilling the tray may cause jams.
5
Squeeze the front guide tab, and slide the guide toward the inside of the tray until it lightly
rests against the edge of the media.
rests against the edge of the media.