Lexmark International Inc LEXM04001 Manuale Utente
Wireless device notice
In some environments, the use of wireless devices may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, and so
on. If you are uncertain of the policy that applies to the use of this device, ask for authorization to use it prior to turning it on.
on. If you are uncertain of the policy that applies to the use of this device, ask for authorization to use it prior to turning it on.
Exposure to radio frequency radiation
The radiated output power of this device is far below the FCC radio frequency exposure limits. A minimum separation of 20 cm (8 inches) must be maintained between the antenna
and any persons for this device to satisfy the RF exposure requirements of the FCC.
and any persons for this device to satisfy the RF exposure requirements of the FCC.
Industry Canada compliance statement
This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation of the device.
device must accept any interference received, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its
transmit antenna) that is installed outdoors is subject to licensing.
transmit antenna) that is installed outdoors is subject to licensing.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general
population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb.
population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb.
Avis de conformité aux normes de l’industrie du Canada
Cet appareil est conforme à la spécification RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne peut engendrer
aucune interférence et (2) il doit accepter toute interférence qu'il reçoit, y compris celles qui peuvent altérer son fonctionnement.
aucune interférence et (2) il doit accepter toute interférence qu'il reçoit, y compris celles qui peuvent altérer son fonctionnement.
Pour éviter toute interférence radio au service sous licence, cet appareil est conçu pour être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.
L'équipement (ou son antenne émettrice) est soumis à l'obtention d'une licence s'il est installé à l'extérieur.
L'équipement (ou son antenne émettrice) est soumis à l'obtention d'une licence s'il est installé à l'extérieur.
L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble
de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb.
de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb.
(chinese placeholder below-remove this statement after translation)
Part name
Toxic and hazardous substances or elements
Lead
(Pb)
(Pb)
Mercury
(Hg)
(Hg)
Cadmium (Cd)
Hexavalent
Chromium (Cr
VI)
Chromium (Cr
VI)
Polybrominated
biphenyl (PBB)
biphenyl (PBB)
Polybrominated
diphenylether (PBDE)
diphenylether (PBDE)
Circuit boards
X
O
O
O
O
O
Connectors
X
O
O
O
O
O
O: Indicates that the content of the toxic and hazardous substance in all the homogenous materials of the part is below the concentration limit
requirement as described in SJ/T11363-2006.
X: Indicates that the content of the toxic and hazardous substance in at least one homogenous material of the part exceeds the concentration
limit requirement as described in SJ/T11363-2006.
This product is compliant with the European Union Directive 2002/95/EC concerning the restriction of use of certain hazardous substances.
requirement as described in SJ/T11363-2006.
X: Indicates that the content of the toxic and hazardous substance in at least one homogenous material of the part exceeds the concentration
limit requirement as described in SJ/T11363-2006.
This product is compliant with the European Union Directive 2002/95/EC concerning the restriction of use of certain hazardous substances.
Part name
Toxic and hazardous substances or elements
Lead
(Pb)
(Pb)
Mercury
(Hg)
(Hg)
Cadmium (Cd)
Hexavalent
Chromium (Cr
VI)
Chromium (Cr
VI)
Polybrominated
biphenyl (PBB)
biphenyl (PBB)
Polybrominated
diphenylether (PBDE)
diphenylether (PBDE)
Circuit boards
X
O
O
O
O
O
Connectors
X
O
O
O
O
O
O: Indicates that the content of the toxic and hazardous substance in all the homogenous materials of the part is below the concentration limit
requirement as described in SJ/T11363-2006.
X: Indicates that the content of the toxic and hazardous substance in at least one homogenous material of the part exceeds the concentration
limit requirement as described in SJ/T11363-2006.
This product is compliant with the European Union Directive 2002/95/EC concerning the restriction of use of certain hazardous substances.
requirement as described in SJ/T11363-2006.
X: Indicates that the content of the toxic and hazardous substance in at least one homogenous material of the part exceeds the concentration
limit requirement as described in SJ/T11363-2006.
This product is compliant with the European Union Directive 2002/95/EC concerning the restriction of use of certain hazardous substances.
P/N 14F0142
E.C. 5E0032
© 2008 Lexmark International Inc. All rights reserved.
*14F0142*