Lexmark International Inc LEXM08001 Manuale Utente
Maintaining the printer
Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and
supplies, may cause damage to your printer.
supplies, may cause damage to your printer.
Networking
Note: Purchase a MarkNet
TM
N8360 wireless network adapter first before setting up the printer on a wireless
network. For information on installing the wireless network adapter, see the setup sheet that came with the
adapter.
adapter.
Connecting the printer to a wireless network using Wi
ϣFi Protected Setup
(WPS)
Before you begin, make sure that:
•
The access point (wireless router) is WPS
ϣcertified or WPSϣcompatible. For more information, see the
documentation that came with your access point.
•
A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.
with the adapter.
Using the Push Button method
1
From the control panel, navigate to:
Settings > Network/Ports > Wireless > Wi
ϣFi Protected Setup > Start Push Button Method
2
Follow the instructions on the display.
Using the personal identification number (PIN) method
1
From the control panel, navigate to:
Settings > Network/Ports > Wireless > Wi
ϣFi Protected Setup > Start PIN Method
2
Copy the eight
ϣdigit WPS PIN.
3
Open a Web browser, and then type the IP address of your access point in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
4
Access the WPS settings. For more information, see the documentation that came with your access
point.
point.
5
Enter the eight
ϣdigit PIN, and then save the changes.
Maintaining the printer
45