Grace Industries Inc T5HIP Manuale Utente

Pagina di 3
Pull Away Tether for Auto-On
Activation from Storage Positions
g
Accountability Key
TPASS
®
5 Accountability Key can be personalized to the spe-
cifi c identity of the user. The clear Identifi cation Window eas-
ily snaps into place to protect enclosed information (photo, 
name, number, dept ID, barcodes, etc.) and provide quick 
identifi cation. Information in the Identifi cation Window can be 
easily changed by prying ID Window open with a small, fl at-
blade screwdriver. 
TPASS
®
5 is designed to be automatically activated into the 
Sensing Mode
 when removed from the TPASS storage posi-
tion. When removed from the storage position, the tether will 
tighten and the Accountability Key will detach automatically, 
putting the TPASS
®
5 into the Sensing Mode
TPASS
®
5 can be Reset from the Alarm to the Sensing Mode
but cannot be turned OFF until the Accountability Key is re-
placed and both side buttons pressed simultaneously.
The Accountability Key has an adjustable tether for ease of 
use. The tether can be adjusted from approximately 3’ to 6½’  
in length. This allows for easy utilization whether you are an-
choring the tether to a transportation position (such as a seat 
in a vehicle) or a fi xed storage position (such as in the fi re 
station). 
Accountability Keys are available with various length tethers 
to facilitate operational needs.
1.
 To Reset, press both side buttons simultaneously 
when Accountability Key is off unit.
2.
 To turn OFF, replace Accountability Key and press 
both side buttons simultaneously.
Emergency 
Alarm Button
Identifi cation
Window
D-Ring 
Grip-Clip
Accountability 
Key
Green, alternating 
LED display
Emergency
Alarm 
Button
Sound 
Ports
TPASS
®
5 with Accountability 
Key in Place
TPASS
®
5
USER’S INFORMATION
Only To Be Removed By End User
Grace Industries, Inc.
www.graceindustries.com
Ph. 724-962-9231 • Fax 724-962-3611
Solutions for Life Safety
Front View with 
Accountability 
Key in Place
© Grace Industries, Inc.
Printed in U.S.A.
FCC Statements
Changes or modifi cations not expressly approved by the party 
responsible for compliance could void the user’s authority to 
operate the equipment. 
NOTE: This equipment has been tested and found to comply 
with the limits for a Class A digital device, pursuant to part 15 of 
the FCC Rules. These limits are designed to pro-vide reason-
able protection against harmful interference when the equip-
ment is operated in a commercial environment. This equip-
ment generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely 
to cause harmful interference in which case the user will be 
required to correct the interference at his own expense.
Industry Canada Statements
This Class A digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt 
RSS standard(s). Operation is subject to the following two 
conditions: (1) this device may not cause interference, and 
(2) this device must accept any interference, including inter-
ference that may cause undesired operation of the device.
Cet appareil numérique de la classe A est conforme à  la 
norme NMB-003 du Canada.(select the class for your device)
Le présent appareil est conforme aux CNR d’Industrie Cana-
da applicables aux appareils radio exempts de licence. L’ex-
ploitation est autorisée aux deux conditions suivantes : (1) 
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur 
de l’appareil doit accepter tout brouillage radioélectrique subi, 
même si le brouillage est susceptible d’en compromettre le 
fonctionnement.
Warranty Information 
Grace Industries, Inc. warrants TPASS
®
5 to be free from defects in work-
manship and materials for a period of one year from date of purchase. This 
warranty is valid only when the returned TPASS
®
5 is accompanied by a 
sales receipt or other proof of purchase that states the date and location of 
purchase. Grace Industries, Inc. will not repair or replace any merchandise 
under warranty which has been damaged because of accident, misuse or 
abuse of the TPASS
®
5 while in possession or control of the consumer or 
outside of Grace Industries Inc’s control. This warranty is void if any attempt 
to repair or replace parts was made or attempted by other than qualifi ed 
Grace Industries, Inc. personnel. This warranty is void if any of the sealed 
compartments are opened or tampered with. Send all returned merchan-
dise, prepaid and accompanied by proof of purchase to: Grace Industries, 
Inc., Repair Division, 305 Bend Hill Road, Fredonia, PA 16124. Customer is 
responsible for return shipping. Grace Industries, Inc. shall not be liable for 
any direct, incidental or other consequential loss or damage arising out of 
the failure of the device to operate.
The sole and exclusive remedy under all guarantees or warranties, ex-
pressed or implied, is strictly limited to repair or replacement as herein 
provided. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED 
TO, WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE HERE-
BY LIMITED IN DURATION TO A PERIOD ENDING ONE (1) YEAR FROM 
THE DATE OF PURCHASE. The warranty and liability set forth in the prior 
paragraphs are in lieu of all other warranties, expressed or implied, in law 
or in fact, including implied warranties of merchantability  and fi tness for a 
particular purpose. Some states do not allow limitations on how long an 
implied warranty lasts, so the above limitations may not apply to you.
This warranty gives you specifi c legal rights and you may also have other 
rights which may vary from state to state.
The information contained in this booklet is believed to be accurate and 
reliable. Grace Industries, Inc. provides this information as a guide only.
TPASS
®
5 technical assistance is available by contacting Grace Industries, 
Inc. at (724) 962-9231 or by email at info@graceindustries.com.
For training purposes a copy of this information is available by contacting 
Grace Industries, Inc.
TPASS
®
5 issues may be reported at any time to Grace Industries, Inc. at 
724-962-9231. After working with the manufacturer to resolve any issues, 
they may be reported to SEI at 703-442-5732.
P/N: TPASS5 UI 0616
Battery Chamber
Inside Battery
Cover
Inside Battery
Cover
+
-
-
+
-
+
Serial 
Number
Battery 
Orientation
Front View without
Accountability 
Key in Place
Use a small, fl at-blade screwdriver to 
pry window open at slot. 
The clear ID Window will release. 
Add ID information and snap window 
back in place.
Snap hook attached to Transportation or Fixed 
Storage Position.
Pull turnout gear away, tether tightens and pulls 
Accountability Key off the TPASS
®
5, automatically 
activating TPASS
®
5 into the Sensing Mode. 
Side View with Accountability Key 
in Place
Auto-On Activation
Side Buttons
Accountability 
Key
www.graceindustries.com
PAR Check: Green
Roll-Call: Red
Transmit: Red
Receive: Green
Antenna Icon
Heat Alarm: Red
Flame Icon
EVACUATE 
Command: 
Red
LED Status Indicators
DRAFT 
0616AM
8.44
P/R
P/R