Grace Industries Inc TP3TXRX Manuale Utente

Front  View
with
Accountability
Key In Place

Certified to meet the requirements of: NFPA 1982,

Standard on Personal Alert Safety Systems (PASS),
1998 edition.

Intntrinsically Safe per ANSI/UL-913 for Use in Class I,

Div. 1, Groups A, B, C, and D Hazardous Locations.
Certified to CAN/CSA Std.C22.2 No. 157-92

Intrinsically Safe, Sécurité Intrinséque.

AVERTISEMENT: La Substitution De Composants Peut

Compromettre La Sécurité Intrinséque.

AVERTISEMENT: Afin De Prévenir L 

,

Inflammation D’

Atmosphéres Dangereuses, NE Changer Les Batteries Que
Dans Des Emplacements Désignés Non Dangereux.

CAUTION: Changes or modifications not expressly ap-
proved by the party responsible for compliance could void
the user’s authority to operate this equipment.

Grace Industries, Inc. warrants the T PASS 3

Evacuate to be free from defects in workmanship
and materials for a period of one year from the date
of purchase. This warranty is valid only when the
returned T PASS 3 is accompanied by a sales slip
or other proof of purchase that states the date and
location of purchase. Grace Industries, Inc. will not
repair or replace any merchandise under warranty
which has been damaged because of accident, mis-
use or abuse of the T PASS 3 while in possession
or control of the consumer. This warranty is void if
any attempt to repair or replace parts was made or
attempted by other than qualified Grace Industries,
Inc. personnel. This warranty is void if any of the
sealed compartments are opened or tampered with.
Send all returned merchandise, prepaid and accom-
panied by proof of purchase to: Grace Industries,
Inc., Repair Division, 305 Bend Hill Road, Fredonia,
PA 16124. Grace Industries, Inc. shall not be liable
for any direct, incidental or other consequential loss
or damage arising out of the failure of the device to
operate.

The sole and exclusive remedy under all guar-

antees or warranties, expressed or implied is strictly
limited to repair or replacement as herein provided.
ALL IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO, WARRANTIES OF FITNESS
AND MERCHANTABILITY, ARE HEREBY LIMITED
IN DURATION TO A PERIOD ENDING ONE (1)
YEAR FROM THE DATE OF PURCHASE. The war-
ranty and liability set forth in the prior paragraphs
are in lieu of all other warranties, expressed or im-
plied, in law or in fact, including implied warranties
of merchantability  and fitness for a particular pur-
pose. Some states do not allow limitations on how
long an implied warranty lasts, so the above limita-
tions may not apply to you.

This warranty gives you specific legal rights and

you may also have other rights which may vary from
state to state.

The information contained in this booklet is be-

lieved to be accurate and reliable. Grace
Industries, Inc. provides this information as a guide
only.

T PASS 3 Evacuate system technical assis-

tance is available by contacting Grace Industries,
Inc. at 724-962-9231.

The TP3 is designed to be automatically activated

into the “Sensing Mode” (motion sensing mode) or
turned “ON” when removed from the PASS storage po-
sition, whether it is a transportation or a fixed storage
position. When removed from the storage position, the
tether will tighten and the Accountability Storage Key
will automatically pop off putting the TP3 into the Sens-
ing Mode. At this point, the unit can be “reset” (from the
alarm to the sensing mode) but cannot be turned “OFF”
until the Accountability Storage Key is replaced and both
side buttons pressed simultaneously.

The Accountability Storage Key has an adjustable

tether for ease of use. The tether can be adjusted from
approx. 3' to 6½’  in length. This allows for easy utiliza-
tion whether you are anchoring the tether to a transpor-
tation position (such as to a seat in a vehicle) or a fixed
storage position (such as in the fire station). Account-
ability Storage Keys are available with various length
tethers to facilitate various operational needs.

The 1998 edition of the 1982 NFPA standard on PASS

requires all stand alone PASS to automatically activate
into the Sensing Mode (motion sensing mode) when
removed from a transportation or a fixed storage posi-
tion. The intention is to provide a higher level of safety
to the Fire Fighter by insuring the PASS is automati-
cally turned ON. Grace Industries, Inc. recommends that
TP3 be utilized in a manner consistent  with the spirit of
the 1998 edition of 1982 NFPA Standard on PASS.

ACCOUNTABILITY KEY

An added benefit of the new Grace system is the Ac-
countability Storage Key. The clear Identification Win-
dow located on the front of the key provides the oppor-
tunity for specific identity of the PASS user through the
ability to personalize keys with pictures, names, num-
bers, dept. ID, bar-codes etc. The  clear access window
easily snaps into place to protect the enclosed informa-
tion and provide instant access for quick ID should the
need arise. Information in the Identification Window can
easily be changed by partially popping the ID window
out with a small, flat blade screwdriver through the ac-
cess slot located on the back side of the key.

Plastic window
pops out. Remove
information and
replace with
information as desired.
Snap window back
in place.

Snap hook attached to Transportation or Fixed

Storage Position.

Pull turnout gear away, the Tether tightens and pulls the
Accountability Key off the PASS. This will automatically
activate the PASS into the Sensing Mode.

PASS
attached to
turnout gear

Snap
Hook

Push small screwdriver
through slot on inside
of key

Solutions for Life Safety 

Emergency
Alarm
Button

FCC
Label

Intrinsic Safety

Label

Serial
Number

General Instruction

Label

Compliance Label

.
.

Accountability
Storage Key

D-ring and
Grip Clip

Sound Port

Gasket
Seal

© Grace Industries, Inc.

Printed in U.S.A.

P/N  T3EVAC-2/03, UI

For training purposes a copy of this information is
available by contacting Grace Industries, Inc.

T PASS 3 Evacuate issues may be reported at any time
to Grace Industries, Inc. at 724-962-9231. After working
with the manufacturer to resolve any issues, they may be
reported to SEI at 703-442-5732.

Solutions for Life Safety 

Case Glows
when Key
Pops Off

Intrinsically Safe, 

Sécurité Intrinséque

French Intrinsic

Safety Label

US

C