Sunrex Technology Corp 1051 Manuale Utente

 
Introduction 

Congratulation on your purchase of the Sunrex wireless mouse. The mouse 

combine RF and new optical technology, reduce the tolerance of clean mouse ball and 
wire mouse interference. You can use mouse freely and conveniently within 1.2 meters. 
 
Note: 

The actual effective distance may increase or decrease depending on the 

surrounding environment. 
 
System Requirements: 
To use the mouse, your computer must meet the following hardware requirements and 
run one if the operating systems listed below. 
Hardware: 

•  PC with and Intel Pentium processor or equivalent and a hard disk drive 

•  64MB RAM or higher, depending on the operating system 
•  USB interface 

 
Operating System: 

•  Windows 98/Me/2000/XP 

 
Connecting the receiver and installing the default driver 

To connect the receiver to your computer, plug the standard USB end of the 

receiver into an available USB port on your computer. Alternatively, you can use the 
supplied USB extension cable to connect the receiver to your computer for an additional 
0.45m of length. 

Your computer’s operating system identifies the receiver a “USB Human 

Interface Device” and begins installing the default driver. Follow any on-screen 
procedure to complete the default driver installation. 
 
Note: 
If you are running the Windows 98/Me operating system, you may be prompted to insert 
the Windows CD-ROM that came with your computer. You are now ready to begin using 
the wireless mouse. 
 
Specification 
Power Supply: 3 AAA batteries 
Rechargeable Distance: 1.2M 
Interface: USB 1.1 
Radio Frequency: 27.01MHz 
Security ID Code: 256ID 
Button: 3 buttons (with wheel) 
Resolution: 800dpi 
Dimension: 125*97*42.5mm 
Compatible system: Windows 98/Me/2000/XP