Chamberlain Wireless Products Inc. HS24 Manuale Utente
Replacing the Batteries:
Please take care not to over twist the battery doors. See diagram:
Remove protective backing from battery. WAIT 3 MINUTES BEFORE USING THE BATTERY.
Remove protective backing from battery. WAIT 3 MINUTES BEFORE USING THE BATTERY.
!
(Do not remove the backing until you are ready to use the battery. Once the backing is removed, the life of the battery will start a 90-day countdown).
This battery technology contains no components harmful to the environment. They may be disposed of in the trash.
Low Battery Warning:
HeadOn features a distinctive low battery beep for each of the components. The Head Set with low battery will generate a single “Beep Tone” every 15
seconds. The Base Unit will generate Two Beep Tones when its battery needs replacement. Please note that the tone for both devices is issued in your ear
through the headset while you are communicating. There are no beeps issued otherwise.
If the system does not operate after long storage, replace the batteries with fresh ones.
seconds. The Base Unit will generate Two Beep Tones when its battery needs replacement. Please note that the tone for both devices is issued in your ear
through the headset while you are communicating. There are no beeps issued otherwise.
If the system does not operate after long storage, replace the batteries with fresh ones.
On-Off Control:
HeadOn is the only product of its kind featuring Fully Automatic Operation. There are no On and Off switches on this system. All functions are Automatic.
How the system turns On and Off: HeadOn is always “Asleep”. When the base unit (unit attached to the phone) detects sounds coming from the telephone,
it will awaken and wake the headset up within 1 second. You may miss the first second of the sound of a ring or button press if the system has been asleep
for longer than one hour. If the system is in normal use, it will not go to full sleep mode and there is no “Turn-on delay”.
If you remain on hold for an extensive period of time, and HeadOn does not detect any sounds from the telephone, it will go into mid-sleep to save power.
During this time, you will not notice any “Hiss” in the background. The system automatically mutes the headset and await any sound to be sent from the
cell phone…. Upon which the HeadOn will re-establish communications within 1/2 of a second. All of these functions are automatic and require no user
input.
How the system turns On and Off: HeadOn is always “Asleep”. When the base unit (unit attached to the phone) detects sounds coming from the telephone,
it will awaken and wake the headset up within 1 second. You may miss the first second of the sound of a ring or button press if the system has been asleep
for longer than one hour. If the system is in normal use, it will not go to full sleep mode and there is no “Turn-on delay”.
If you remain on hold for an extensive period of time, and HeadOn does not detect any sounds from the telephone, it will go into mid-sleep to save power.
During this time, you will not notice any “Hiss” in the background. The system automatically mutes the headset and await any sound to be sent from the
cell phone…. Upon which the HeadOn will re-establish communications within 1/2 of a second. All of these functions are automatic and require no user
input.
Interference
HeadOn has been designed to automatically move away from channels that are busy or noisy. If the conversation becomes noisy, HeadOn will change
channels transparently. If the noise persists, simply move a few inches.
Connecting To The Cellphone
HeadOn features two methods of mounting to the phone. You can use the flat mounting plate or a belt clip.
How to mount the dongle onto the phone:
1: Mount the dongle onto the plate.
2: Before taping it to the phone, test it…..