Chamberlain Wireless Products Inc. KPD1 Manuale Utente
5.4 CHANGING THE MASTER PIN NUMBER
ORACLE WIRELESS KEYPAD (OWK) SETTINGS
6.1 OWK KEYPAD BRIGHTNESS
8.0 BATTERIES
7.5 POWER-SAVE MODE
- 6 -
QUICK LIST OF FUNCTIONS
- 11 -
5.3 TEMPORARY USER PIN NUMBER
A temporary PIN number can be issued with an OWK5 (6 for an
OWK250), for a 1 time only use, within a 24 hour time period.
To issue a temporary PIN number, on the OWK:
Enter your Master PIN Number (for example):
Followed by:
Enter the temporary PIN number (for example):
To limit the new PIN number to a single Gate Controller, enter the
PIN number followed by the Gate Controller ID (1-4) that it will
access, resulting in a five digit PIN number.
The Wireless Keypad Unit will give a single beep as the new PIN
Number is accepted.
OWK250), for a 1 time only use, within a 24 hour time period.
To issue a temporary PIN number, on the OWK:
Enter your Master PIN Number (for example):
Followed by:
Enter the temporary PIN number (for example):
To limit the new PIN number to a single Gate Controller, enter the
PIN number followed by the Gate Controller ID (1-4) that it will
access, resulting in a five digit PIN number.
The Wireless Keypad Unit will give a single beep as the new PIN
Number is accepted.
Power-Save Mode will increase battery life by reducing power consumption
and limiting some features. (See NOTE below.) In Power-Save mode,
the keypad will only light up when a key is pressed.
To enter Power-Save Mode:
Enter the Master PIN Number (for example):
Followed by:
To exit Power-Save Mode:
Enter the Master PIN Number (for example):
Followed by:
and limiting some features. (See NOTE below.) In Power-Save mode,
the keypad will only light up when a key is pressed.
To enter Power-Save Mode:
Enter the Master PIN Number (for example):
Followed by:
To exit Power-Save Mode:
Enter the Master PIN Number (for example):
Followed by:
The Gate Controller uses four ‘AA’ batteries. The average life of the Gate
Controller’s batteries is a year-and-a-half, depending on use.
The Wireless Keypad Unit uses four ‘AA’ Alkaline batteries. The average
life of the Wireless Keypad Unit’s batteries is a year with all functions
enabled. Enabling Power-save Mode can extend the battery life up to two
years.
Controller’s batteries is a year-and-a-half, depending on use.
The Wireless Keypad Unit uses four ‘AA’ Alkaline batteries. The average
life of the Wireless Keypad Unit’s batteries is a year with all functions
enabled. Enabling Power-save Mode can extend the battery life up to two
years.
Enable OWK Learn Mode
PIN 05
Add User-Level PIN numbers
PIN 9 PIN
Add User-Level PIN numbers w/GCU restrict
PIN 9 PIN (1-4)
Add a Temporary PIN number
PIN 51 PIN
Add a Temporary PIN number w/GCU restrict
PIN 51 PIN (1-4)
Removing PIN numbers
PIN 7 ### PIN
Change the Master PIN number
PIN 09 ### PIN
OWK Brightness Control
PIN 08 (1-3)
Place GAP in Multi-GAP Passive Mode
PIN 56
Default GCU #3 to the Passive OWK
PIN 58
Default GCU #4 to the Passive OWK
PIN 59
Place OWK back to Active Mode
PIN 57
Party Mode
PIN 54
Vacation Mode
PIN 52
Exit Vacation Mode
PIN 53
Power-Save Mode
PIN 03
Exit Power-Save Mode
PIN 04
Alternate Channel Set
PIN 55 (1-3)
1 2 3 4
1 2 3 4
0 3
0 4
"BEEP"
5 1
1 2 3 4
4 3 2 1
To change the Master PIN Number, on the OWK:
Enter the existing Master PIN Number (for example):
Followed by:
Press:
Enter the NEW Master PIN Number (for example):
The Wireless Keypad Unit will give a single beep as the new PIN
Number is accepted.
Enter the existing Master PIN Number (for example):
Followed by:
Press:
Enter the NEW Master PIN Number (for example):
The Wireless Keypad Unit will give a single beep as the new PIN
Number is accepted.
# # #
0 9
"BEEP"
1 2 3 4
4 3 2 1
When it is dark out, the Wireless Keypad Unit uses an Infrared
proximity sensor to light up the keypad when you come within five
feet of it or when a button is pressed. This feature is disabled in
Power Save Mode (see Power-save Mode).
To brighten or dim, on the OWK:
Enter the Master PIN Number (for example):
Followed by:
Enter:
The Wireless Keypad Unit will give a single beep as the new level is
accepted. The default level is 2.
proximity sensor to light up the keypad when you come within five
feet of it or when a button is pressed. This feature is disabled in
Power Save Mode (see Power-save Mode).
To brighten or dim, on the OWK:
Enter the Master PIN Number (for example):
Followed by:
Enter:
The Wireless Keypad Unit will give a single beep as the new level is
accepted. The default level is 2.
1, 2, or 3
8
0
1 2 3 4
Model OWK
9/6/2007
Patents Pending