Chamberlain Wireless Products Inc. TRX1 Manuale Utente
Carton Inventory
Overview
The Intercom has up to a 1000' range and allows
multiple simultaneous conversations, using a
900 Mhz secure digital radio link. The intercoms form
an exclusive network and respond only to other
intercoms in the network.
multiple simultaneous conversations, using a
900 Mhz secure digital radio link. The intercoms form
an exclusive network and respond only to other
intercoms in the network.
Intercom (2 in Model RWIS)
1
Rubber Pads
(2 in Model RWIS)
Operation & Features
Channel Button: Press the Channel button to set
intercom to one of four secure
channels or the paging channel.
The default channel for the intercom
is the paging channel where all four
channel lights are lit. An intercom on
a channel can only hear an
intercom on the same channel or on
the paging channel.
intercom to one of four secure
channels or the paging channel.
The default channel for the intercom
is the paging channel where all four
channel lights are lit. An intercom on
a channel can only hear an
intercom on the same channel or on
the paging channel.
Volume: Pressing the Volume
button repeatedly will cycle through
volume levels.
button repeatedly will cycle through
volume levels.
Battery: The AA Alkaline batteries (not provided) will
last up to a year depending on use (Lithium batteries
recommended for colder
environments). When batteries are
low intercom will emit two beeps
every ten minutes.
An AC Adapter (not provided) can
also be used to power the intercom.
In this case, both the power and
channel lights will remain on.
last up to a year depending on use (Lithium batteries
recommended for colder
environments). When batteries are
low intercom will emit two beeps
every ten minutes.
An AC Adapter (not provided) can
also be used to power the intercom.
In this case, both the power and
channel lights will remain on.
Conference Mode: Conference Mode allows multiple
intercoms to participate in a conversation compared
to Normal Mode in which only two intercoms can
communicate. All intercoms must be set to the same
channel or the paging channel to be in
Conference Mode. To put intercom in
Conference Mode set Dipswitch #2 to UP
position.
intercoms to participate in a conversation compared
to Normal Mode in which only two intercoms can
communicate. All intercoms must be set to the same
channel or the paging channel to be in
Conference Mode. To put intercom in
Conference Mode set Dipswitch #2 to UP
position.
Monitor Mode: Monitor Mode is used to monitor the
noise in a specific room. Place the intercom in the
room that is to be monitored and
press and hold the Talk and Volume
buttons until a tone is heard. Any
other networked intercom can listen
to that room. If a specific channel is
selected for Monitor Mode then only
other intercoms on that channel or
on the paging channel can listen.
noise in a specific room. Place the intercom in the
room that is to be monitored and
press and hold the Talk and Volume
buttons until a tone is heard. Any
other networked intercom can listen
to that room. If a specific channel is
selected for Monitor Mode then only
other intercoms on that channel or
on the paging channel can listen.
Voice Activation Mode (VOX): Voice Activation
Mode (VOX) allows a call to be answered without
pressing the Talk button. Once a call is heard on an
intercom which has been set to VOX, a response can
be given by speaking loudly into the intercom. There
will be a slight delay when VOX is first activated by a
voice, but will continue to transmit audio until
the speaking stops. To put intercom into VOX,
place Dipswitch #1 to the UP position.
Mode (VOX) allows a call to be answered without
pressing the Talk button. Once a call is heard on an
intercom which has been set to VOX, a response can
be given by speaking loudly into the intercom. There
will be a slight delay when VOX is first activated by a
voice, but will continue to transmit audio until
the speaking stops. To put intercom into VOX,
place Dipswitch #1 to the UP position.
On/Off: To turn intercom ON, press any button.To
turn intercom OFF, hold down the Volume button for
5 seconds.
turn intercom OFF, hold down the Volume button for
5 seconds.
Talk Button: To talk, hold down the
Talk button. All intercoms in the
network that are on the same
channel will receive the signal.
Release the Talk button when done
talking and within 10-15 seconds
press and hold the Talk button of a
different intercom to make a secure channel between
the two. Once the channel is made the other
intercoms in the network cannot hear the
conversation.
Talk button. All intercoms in the
network that are on the same
channel will receive the signal.
Release the Talk button when done
talking and within 10-15 seconds
press and hold the Talk button of a
different intercom to make a secure channel between
the two. Once the channel is made the other
intercoms in the network cannot hear the
conversation.
Volume Button
Talk
(Power - On)
(Power - On)
Channel Button
Learn Button
Dipswitch #1
Dipswitch #2
Dipswitch #2
AC Adapter
Model RWIA & RWIS
Wireless Portable Intercom
®
OPTIONAL
1
2
1
2
Microphone
Channel Lights