HID Global Corporation 5127MODMIN Manuale Utente

PLT-02395, Rev A.3

OMNIKEY®

Installation Guide

© 2010-2017 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may not be reproduced, disseminated or republished in any form without the 

prior written permission of HID Global Corporation.
HID Global, HID, the HID Brick Logo, ICLASS SE, OMNIKEY, and SEOS are the trademarks or registered trademarks of HID Global Corporation, or its licensors, in the U.S. 

and other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners.

1021, 3021, 3121, 5021, 5022, 5023, 

5025, 5027, 5127, 5421, 5422, 5427, 6121

611 Center Ridge Drive

Austin, TX 78753

USA

19/F 625 King’s Road

North Point, Island East

Hong Kong

Phoenix Road

Haverhill, Suffolk CB9 7AE

England

www.hidglobal.com/support

www.hidglobal.com/omnikey

This guide describes physical behaviour and conformities of 

OMNIKEY Smart Card Readers.
1021 USB - Desktop smart card reader in a small form factor for 

desktop and mobile usage.
3021 USB - High-performance smart card reader, with a USB 

interface and small form factor for desktop and mobile usage.
3121 USB - High-performance smart card reader for desktop use 

with multiple standing base options in a robust housing.
5021 USB - Contactless Reader with USB interface for desktop 

use that reads/writes to 13.56 MHz smart cards.
5022 USB - Contactless Reader with USB CCID-compliant 

interface for desktop use that reads/writes to 13.56 MHz smart 

cards.
5023 USB - A 5022 Reader with iCLASS and Seos support.
5027 USB - A 5023 Reader with Keyboard wedge.
5025 CL USB - Contactless Reader with USB CCID-compliant 

interface for desktop use that reads contactless (125 kHz) Prox 

cards.
5127 / 5427 CK/ 5427 UE USB - Contactless 13.56MHz/125kHz 

reader with CCID/Keyboard wedge interface.
5427 G2 - Contactless 13.56MHz/125kHz reader with CCID/

Keyboard wedge interface and BLE.
5421 / 5422 USB - Dual interface PC-linked reader that reads/

writes to 13.56 MHz contactless cards and virtually any contact 

smart card. 5422 includes CCID.
6121 Mobile USB - Dongle-sized smart card reader for SIM-sized 

smart cards, especially well suited for use with mobile devices.

 

ƒ

Smart Card Reader

 

ƒ

Installation Guide

Find drivers, reader documentation supporting various 

operating systems at: 

www.hidglobal.com/omnikey

See the application note for card loading and handling 

instructions at: 

www.hidglobal.com/omnikey

For further information, contact HID support: 

www.hidglobal.com/support

For driver setup, consult the OMNIKEY Smart Card User Guide.
CAUTION: Install the drivers prior to attaching the OMNIKEY 

reader with the computer.
ATTENTON: Vous devez installer le driver avant de connecter le 

lecteur OMNIKEY à l’ordinateur.

32°F to 131°F (0°C to 55°C)

1021, 3021, 3121, 5021, 5022, 5023, 5025 CL, 

5027, 5422, 5427 G2

5421, 5427 CK

500,000 Hours

USB 2.0 CCID (USB 1.1 Compatible)

12 Mbps (USB 2.0 Full Speed)

Bus Powered

1.  Connect the reader with computer; plug the USB connector 

into your computer’s USB port.

2. When the reader is operational, the LED illuminates.
3. For contactless operation, hold the card next to the reader 

logo. For contact smart cards, insert the card into the reader 

with contacts facing up.

4. The LED blinks when the reader is exchanging data with a 

card (reading/writing).