HID Global Corporation 5553 Manuale Utente
1508-USM-00-0-04
HF Multi ISO RFID Reader User Manual, Firmware V1.4
4.5 Using NFC
Q.
How do I use NFC?
A
The example shows how to communicate with NFC using the NFC demo-board PN531.
The reader is the initiator. The NFC has to be configured as passive target using MIFARE
106kbps (other NFC modes are not supported).
106kbps (other NFC modes are not supported).
As first step place the reader on top of the NFC demo-board antenna in 3 cm distance.
Then load the "passive_target_106.cmd" file from the "Scripts\Tama\P2P" subfolder into the
SCRTester application. Run the code.
SCRTester application. Run the code.
Now it is possible to get a serial number from the NFC.
Command
Answer
S 08123456
Page 108 of 144
August 2010
© 2005-2010 HID Global Corporation. All rights reserved.