HID Global Corporation 5553 Manuale Utente
1508-USM-00-0-04
HF Multi ISO RFID Reader User Manual, Firmware V1.4
2.3.1.16 Set Configuration Flags
This command allows setting some configuration flags just in time; no reset is needed. The values
are not stored in the EEPROM; therefore, the changed values are not available after a reset.
are not stored in the EEPROM; therefore, the changed values are not available after a reset.
Command
Command
Data
of
flag type (1 byte)
data (1 byte)
data (1 byte)
Answer
Answer
Description
Data (1 byte)
Current state of changed flag.
'R'
Error: Out of range
Example
Command
Description
of 01 01
Answer: 01
Enables the New Serial Mode flag.
Enables the New Serial Mode flag.
Page 54 of 144
August 2010
© 2005-2010 HID Global Corporation. All rights reserved.