HID Global Corporation OK5127CKMINI Manuale Utente
Installation Guide
OMNIKEY Smart Card Reader
© 2010-2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
3
Specifications and Installation
For further information, contact HID support:
For driver setup, consult the OMNIKEY Smart Card User Guide.
CAUTION: Install the drivers prior to attaching the OMNIKEY reader with the computer.
ATTENTON: Vous devez installer le driver avant de connecter le lecteur OMNIKEY à l'ordinateur.
CAUTION: Install the drivers prior to attaching the OMNIKEY reader with the computer.
ATTENTON: Vous devez installer le driver avant de connecter le lecteur OMNIKEY à l'ordinateur.
USB Connected Reader Specifications
Operating Temperature
0°- 55° C / 32°- 131° F
PC Connector Cable
150 cm / 59.1 in - Models 1021, 3021
200 cm / 78.7 in - Models 5021, 5025 CL, 5421, 5427 CK
180 cm / 70.9 in - Other Models
Mean Time Between Failures (MTBF)
500,000 Hours
Host Interface
USB 2.0 CCID (USB 1.1 Compatible)
Host Data Transmission Speed
12 Mbps (USB 2.0 Full Speed)
Power Supply
Bus Powered
USB Connected Reader Installation
1. Connect the reader with computer; plug the USB connector into your computer’s USB port.
2. When the reader is operational, the LED illuminates.
3. For contactless operation, hold the card next to the reader logo. For contact smart cards,
insert the card into the reader with contacts facing up.
4. When the reader is exchanging data with a card (reading/writing), the LED blinks.
PCMCIA and ExpressCard Reader Specifications
4321
4121 CL
4040
Operating Temperature
0°- 55° C / 32°- 131° F
Mean Time Between Failures (MTBF)
500,000 Hours
Host Interface
ExpressCard
54mm
ExpressCard 34mm
PCMCIA
Host Data Transmission Speed
12 Mbps
16 Mbps
Power Supply
Bus Powered
PCMCIA
PCMCIA and ExpressCard Reader Installation
1. Insert the reader into the compatible interface slot of your Notebook or mobile device.
2. If the reader is operational, observe the reader in your operating system’s Device Manager.
3. For contactless operation, hold the card next to the logo on the reader. For contact smart
cards, insert the card into the reader with contacts facing up.