HID Global Corporation RPKCL40E Manuale Utente
INSTALLATION GUIDE
hidglobal.com
An ASSA ABLOY Group brand
© 2016 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS are trademarks or registered trademarks of HID Global, or its licensors, in the U.S.
and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners.
This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output
are fictitious. Specifications are subject to change without notice.
RKCL40E, RPKCL40E, RKCLB40E
SRD Model: RPKCL40E, RKCLB40E
iCLASS SE Biometric/iCLASS SE Display
Installation
1
Mounting
Attach Backplate and Mounting Gasket to Junction Box.
2
Wiring
Pigtail
Terminal
Description
Pigtail
Terminal
Description
Yellow
P1-1
Beeper Input
Red / Green
P2-7
GPIO1 (RS232-T / RS485-FDX/HDX-A)
Orange
P1-2
LED Input (GRN)
Tan
P2-6
GPIO2 (RS232-R / RS485-FDX/HDX-B)
Black
P1-3
Ground (RTN)
Violet
P2-5
*Open Collector Output / Tamper
Red
P1-4
+VDC
White
P2-4
**Wiegand Data 1 / Clock
Drain
P1-5
Unused
Green
P2-3
**Wiegand Data 0 / Data
Brown
P1-6
LED Input (RED)
Pink
P2-2
GPIO3 (RS485-FDX-Z)
Blue
P1-7
Hold Input
Gray
P2-1
GPIO4 (RS485-FDX-Y)
*Tamper Output - When activated, output synchronizes to ground (default).
**Dependent upon reader configuration. See the HTOG for Wiegand and Clock-in-Data configurations.
**Dependent upon reader configuration. See the HTOG for Wiegand and Clock-in-Data configurations.
Junction box not
included.
included.
Install gasket
Mounting holes for US double-
gang electrical boxes.
gang electrical boxes.
Reverse Configuration Rotating the backplate
180° allows for placing the LCD display on left
and the reader on right.
See Section B Alternate Reader Assembly for
instructions, before proceeding to Section 2:
Wiring.
and the reader on right.
See Section B Alternate Reader Assembly for
instructions, before proceeding to Section 2:
Wiring.
P1
P2
P2
Beeper
GRN LE
D
GN
D
+VDC
DRAIN
RE
D
HOLD
GPIO
1
GP10
2
OC/TMP
R
DATA
1/CL
K
1/CL
K
DATA
2/D
2/D
ATA
GPIO
3
GPIO
4
Beeper
GRN LED
GND
+VDC
DRAIN
RED
HOLD
GPIO1
GP102
OC/TMPR
DATA1/CLK
DATA2/DATA
GPIO3
GPIO4
Terminal Reader
(Terminal block and
module position varies)
ATTENTION
Observe precautions for handling
ELECTROSTATIC SENSITIVE DEVICES
Note: Previous iCLASS readers had reversed
RS-485 wiring ( P2-7 & P2-6 - A & B).
When upgrading, ensure proper connections
as defined below.
Wall backplate