HID Global Corporation SE3200 Manuale Utente
OEM50
SE32XX
P1 Connector
Pin 1
Open Output
SE32XX does not have a similar signal
Pin 2
Ground
Same as P301 pin 2, signal Ground
Pin 3
Wiegand Data1
Wiegand data output is per the SIA AC-01
(1996.10) specification, except Voh is 3.3VDC
max, and not 4.0 to 5.5 VDC
OEM50 is inverted logic
OEM50 is inverted logic
Pin 4
Wiegand Data0
Wiegand data output is per the SIA AC-01
(1996.10) specification, except Voh is 3.3VDC
max, and not 4.0 to 5.5 VDC
OEM50 is inverted logic
OEM50 is inverted logic
Pin 5
Power On Reset
Same as P701 pin 3 /Reset function
Pin 6
Hold
Similar to P701 pin 4, however /Hold is low active
2.5.2 OEM75
The SE32XX module I/O is directly pin-for-pin compatible with the OEM75.
The OEM75 antennas are incompatible with the SE32XX module.
ULPM average current remains the same while peak current is higher for the SE32XX
The OEM75 antennas are incompatible with the SE32XX module.
ULPM average current remains the same while peak current is higher for the SE32XX
module.
2.5.3 eProx Lock Module
The eProx
®
Lock connector is the same as the SE32XX connector P701.
CAUTION: The connections between the SE32XX and the eProx Lock modules are
reversed.
A straight-thru cable will not work. Twist the cable 180 degrees to ensure that Pin 1 on one
A straight-thru cable will not work. Twist the cable 180 degrees to ensure that Pin 1 on one
module correctly mates with Pin 1 on the other module.
The two-wire 125 kHz antenna for the eProx Lock may not be interchangeable with an
The two-wire 125 kHz antenna for the eProx Lock may not be interchangeable with an
SE32XX Prox antenna.