HID Global Corporation SMARTTRANS1 Manuale Utente
Page 16 of 19
February 13, 2008
© 2008 HID Global Corporation. All rights reserved.
SmartID Proximity Reader - 8030-901, Rev A.0
5.5 Mullion Reader Mounting Plate – Spacer
The sizes in the drawing are in millimeters, 1 mm is 0.039 in.
Figure 5 Mounting Plate Spacer
February 13, 2008
© 2008 HID Global Corporation. All rights rese
SmartID Proximity Reader - 8030-901, Rev A.0
2 Overview
The SmartID 13.56MHz and SmartTRANS 13.56MHz + 12
slim door mountable design to match any installation enviro
LED’s and buzzer allow the SmartID Readers to be mounte
slim door mountable design to match any installation enviro
LED’s and buzzer allow the SmartID Readers to be mounte
The SmartID reader accepts 5 to 24 Volts DC. The reader o
Wiegand, Clock-and-Data (Magstripe ABA / ISO7811), RS2
hardware interfaces.. The 5 Volt DC capabilities allow the re
reader systems without rewiring or pulling new cables. The
high reliability, consistent read characteristics and low powe
Wiegand, Clock-and-Data (Magstripe ABA / ISO7811), RS2
hardware interfaces.. The 5 Volt DC capabilities allow the re
reader systems without rewiring or pulling new cables. The
high reliability, consistent read characteristics and low powe
The SmartID reader family includes RS232/RS422/RS485
read-only and read/write operations.
read-only and read/write operations.
Standard capabilities include host system controlled red an
buzzer.
buzzer.
2.1 Mullion Mounting
Ideally suited for mullion-mounted door installations or any f
not cover junction box). An optional single-gang electrical b
available.
not cover junction box). An optional single-gang electrical b
available.
2.2 Indications
When a card is read successfully, the card data is sent to th
buzzer sounds a short 3KHz beep. Both LED’s and the buz
by the host system.
buzzer sounds a short 3KHz beep. Both LED’s and the buz
by the host system.
2.3 Connections
The SmartID reader family has a flexible and reliable conne
space for the cable and the connector within the SmartID ho
with silicone to withstand harsh environmental conditions.
space for the cable and the connector within the SmartID ho
with silicone to withstand harsh environmental conditions.
2.4 Output Protocols
The SmartID reader family operates with any facility, system
scheme. The data output format, contents and length are d
personalization of the card or configuration of the reader.
scheme. The data output format, contents and length are d
personalization of the card or configuration of the reader.
The readers are intended for connection to an Access Cont
compatibility to the reader is referenced in the control unit’s
compatibility to the reader is referenced in the control unit’s
2.5 Security
The SmartID reader family offers high security challenge re
protect the RFID air interface against various attack scheme
playback attacks.
protect the RFID air interface against various attack scheme
playback attacks.