HID Global Corporation 4045 Manuale Utente
HID
CORPORATION
33
DELETING USERS
To delete a user from the EntryProx, you must know the
User Location in which the information is stored.
User Location in which the information is stored.
1. Place the EntryProx unit in program mode. Press:
99 # Master Code * (default is 1234)
2. On the EntryProx keypad, press:
user location #**
3. Press * to exit program mode.
BLOCK DELETE USERS
Use Command 58 to delete all cards / PINs in a block of
User Locations. The yellow LED will blink rapidly during
the deletion process. It can take several seconds to delete
large blocks of users. The following items will generate a
programming error:
User Locations. The yellow LED will blink rapidly during
the deletion process. It can take several seconds to delete
large blocks of users. The following items will generate a
programming error:
Entering a starting User Location of 1 or greater than
2000
Entering a total number of locations which exceeds
1999
Entering a starting user location and number of
locations which exceeds 2000
2000
Entering a total number of locations which exceeds
1999
Entering a starting user location and number of
locations which exceeds 2000
To block delete user locations, follow these steps:
1. Place the EntryProx unit in program mode. Press:
99 # Master Code * (default is 1234)
2. On the EntryProx keypad, press:
58 # start location # start location # number of
locations * number of locations*
locations * number of locations*
3. Press * to exit program mode
CHANGING THE MASTER CODE
Use the Quick Program Feature to change the master code
1. Place the EntryProx unit in program mode. Press:
99 # Master Code * (default is 1234)
2. On the EntryProx keypad, press:
1 # (new code) * (repeat new code) *
3. Press * to exit program mode