HID Global Corporation 607XA Manuale Utente
____________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (714) 598-1600 (800) 237-7769 FAX (714) 598-1690
Web page, E-mail - www.prox.com MIFARE
Web page, E-mail - www.prox.com MIFARE
Wiegand Reader Installation Manual 6074-901 REV 2 4 of 5
Testing and Operation
When power is applied to the reader the LED will turn – on Red. This indicates that the microcontroller is
operating properly. Present an ID card to the reader. The LED will momentarily turn green while the
beeper beeps once, indicating that the card was read successfully. In normal operation, the Red LED is
normally on and the Green LED flashes on a valid card read. The Green LED and Beeper respond when
their respective user input line is pulled low. There is no operation for the Red LED user input.
operating properly. Present an ID card to the reader. The LED will momentarily turn green while the
beeper beeps once, indicating that the card was read successfully. In normal operation, the Red LED is
normally on and the Green LED flashes on a valid card read. The Green LED and Beeper respond when
their respective user input line is pulled low. There is no operation for the Red LED user input.
Please note that typical read range for MIFARE
cards is 1.5 – 2.0” (37-50 mm).
Card Compatibility
The HID MIFARE
Reader reads serial number data from these cards: HID MIFARE
, Any Philips
compatible MIFARE
Standard contactless smart card. The reader will read the MIFARE
Card Serial
Number only from all MIFARE
cards, including MIFARE
Lite and MIFARE
Pro cards.
*The HID MIFARE
reader will not read 125 kHz HID Proximity cards.
CSN Read Only Mode
In CSN Only mode, the reader reads the 32-bit MIFARE
random card serial number (CSN or UID) from
any MIFARE
card, including MIFARE
Lite, MIFARE
Standard and MIFARE
Pro, outputting that data
in a 40-bit Wiegand format - 32-bit CSN + 8 bit checksum format.
Sector Read Only Mode
In Sector Read Only Mode the reader reads and outputs a specified number of bits from a specified
sector based on reader configuration. The following reader attributes can be configured at the factory to
meet individual needs.
sector based on reader configuration. The following reader attributes can be configured at the factory to
meet individual needs.
• Application sector (0 – 15)
• Application Block (0-2)
• Sector
• Application Block (0-2)
• Sector
Key
• Number of Bits Output (1-128)
• Starting Bit Number (0-127)
• Audio/Visual feedback (ON/Off)
• Starting Bit Number (0-127)
• Audio/Visual feedback (ON/Off)
Product Configuration/Ordering Options
6074 A X X XX -XXXX Y
Customer Custom Artwork or Firmware Number - 1 through 9, A
through Z
through Z
Customer Custom Number
Configuration Options - (00 standard)
Standard Hardware Options - P = Pigtail
Color - G = Gray
Current Revision Letter
Model Number 6074 = MIFARE
Wiegand
¾
Standard Wiegand Part Number = 6074AGP00 is a MIFARE
Wiegand, Gray Standard (1”)
housing, Potted, with 9 conductor, 18” Pigtail.