HID Global Corporation 630XA Manuale Utente
Installation Guide
iCLASS Reader Models RK40 & RWK400
An
ASSA
ABLOY
Group
company
ASSA ABLOY
_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690
Web page - www.hidcorp.com e-mail – tech@hidcorp.com iClass Keypad Reader Install Manual 6094-901 Rev A
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690
Web page - www.hidcorp.com e-mail – tech@hidcorp.com iClass Keypad Reader Install Manual 6094-901 Rev A
Page 1 of 2
PARTS INCLUDED
SPECIFICATIONS
• 1
-
iCLASS Keypad Reader
•
Voltage Range: 12VDC (10 - 16VDC).
•
1 - Installation Manual
•
Current: 100mA avg / 220mA peak.
•
2 - 3.5mm x .6 pitch x 12mm Phillips machine screws
•
Cable distance to Host: 500ft (152m) max – Wiegand.
•
3 - #6-32 x .375” Phillips self-tapping machine screws
50ft (15m) max – RS-232.
•
2 - #6 x 1.5” Phillips sheet metal screws
4000ft (1216m) max – RS-485.
•
1 - #6-32 x .375” Spanner security screw
•
Op. Temperature: -31°F - +149°F (-35°C – +65°C)
Recommended:
•
Open collector output:
Sink – 40mA, source – 1mA.
•
Up to 10 wire splices *
Standards:
•
Cable, 9 conductor, 22AWG, shielded (Wiegand)
•
Cable , 6 conductor, 22AWG, shielded (Serial)
•
Read/Write* capability in ISO 1SO 15693-2 mode with HID
iCLASS credentials.
iCLASS credentials.
•
Linear DC Power Supply
•
Metal or plastic junction box
•
Security Tool (for security screw) HID 04-0001-03
•
Read/Write* capability in ISO 1SO 14443-B mode with HID
iCLASS 16KS.
iCLASS 16KS.
•
Magnetic Tamper switch - Ademco 945T, Sentrol
1038T, GRI 100T or 110T or Aleph DC-2531
1038T, GRI 100T or 110T or Aleph DC-2531
•
Read capability of CSN/UID in ISO 1SO 14443-A1 mode
with HID Mifare and other 3
with HID Mifare and other 3
rd
party Mifare credentials.
* RK40 available with 18” wire pigtail or 10-pos. removable
screw terminal connector. RWK400 includes 8-pos. and 10-
pos. removable screw terminal connectors.
screw terminal connector. RWK400 includes 8-pos. and 10-
pos. removable screw terminal connectors.
* RK40 is a read only, while RWK400 is a read/write unit.
INSTALLATION
1- Disassemble
A. Remove the screw at the bottom of the unit.
B. Lift the mounting plate out at the bottom side
C. Slide mounting plate down
B. Lift the mounting plate out at the bottom side
C. Slide mounting plate down
2- Install Tamper Switch
An internal magnet provides tamper indication when used with a magnetic reed switch connected to an external alarm
system. Locate Switch behind the left side of the mounting plate, centered between the mounting holes.
system. Locate Switch behind the left side of the mounting plate, centered between the mounting holes.
Electrical Back Box
Wall Surface