HID Global Corporation X001800C Manuale Utente

© 

2010 

HID 

Global 

Corporation 

 

       All 

rights 

reserved 

 

  Caution:  Do not run the cards with a contaminated, dull or uneven surface through the 

Printer.  

 

1 

•  Printing onto such cards will ultimately lead to poor print quality and will 

greatly reduce the life of the Printhead. Card Types include PVC or PVC 
finish.    

•  Cards eject into the Output Hopper or Reject Hopper.  

•  Each Hopper holds 100 cards.    

•  The DTC4500  is available with two (2) Hopper configurations: Single and 

Dual Hopper 

•  Certain types of smart card chips are raised slightly above the cards 

surface which may result in poor color transfer. Design the card with white 
space surrounding the chip. (Note:  The Fargo DTC4500 Printer is capable 
of printing single load cards and multiple feed cards (batch mode).)

 

 

•  To print using single feed, simply remove all cards from the Card Hopper, 

leave the Card Hopper door closed and place a card in the single Feed 
Card Slot (which can be used repeatedly).  

• 

Again, the cards should be loaded with the print side down and (if 
applicable) the magnetic strip up and towards the front of the Printer. 

 

DTC4500 Card Printer/Encoder User Guide

 

19