HID Global Corporation X001800C Manuale Utente
©
2010
HID
Global
Corporation
All
rights
reserved
Troubleshooting with the Error Message Table
Error Message
Cause
Solution
# 2
Head Move Error
# 3
Headlift Error
|contextid=201
This is a problem with the
Printhead Lift.
Printhead Lift.
Reset the Printer and try again.
• If this problem persists, call for
technical assistance.
# 8
Head Sensor Error
|contextid=200
The Printhead
Temperature Sensor is not
functioning or is not
connected properly.
OR
The Printhead is not
cooling properly.
Temperature Sensor is not
functioning or is not
connected properly.
OR
The Printhead is not
cooling properly.
Reset the Printer and try again.
• If the problem persists, call for
technical assistance.
# 9
Reboot Required
Unspecified system error
detected by the Printer
Firmware.
detected by the Printer
Firmware.
Reset the Printer and try again.
• If this problem persists, call for
technical assistance.
# 25
Ribbon not Installed
|contextid=232
A Ribbon is not installed in
the Printer.
the Printer.
Install a Ribbon and retry.
DTC4500 Card Printer/Encoder User Guide
82