HID Global Corporation X001800C Manuale Utente

© 

2010 

HID 

Global 

Corporation 

 

       All 

rights 

reserved 

 

Perform this procedure approximately every 1000 prints to maintain a consistent print quality. (Note: 
The Card Feed Rollers move the card throughout the print process. Rollers should be kept clean to 
prevent card jams and card contamination. This cleaning process will ultimately lead to better print 
quality and extended Printhead life.)  

1 

a.  Open the Printer’s Front Cover and 

remove the Print Ribbon. 

b.  Remove all the cards from the 

Printer’s Input Hopper.  

 

 

2 Use 

the 

Cleaning Card from the 

Printer’s and remove the adhesive 
backing from both sides of the card.  

If your Printer has a Magnetic Encoder 
installed, be sure to leave the small 
Liner Strip on top of the Cleaning Card 
in place.  

This small strip is needed to protect the 
Magnetic Head from the adhesives on 
the Cleaning Card.

 

 

3 Insert 

the 

Cleaning Card into the 

Single Feed Card Slot until the card 
stops. 

If your Printer is equipped with a 
Magnetic Encoder, you must insert the 
Cleaning Card with the printed side up 
and with the small Liner Strip towards 
the front of the Printer. 

 

 

DTC4500 Card Printer/Encoder User Guide

 

97