Pantech c810 Manuale Utente
33/125
Contacts
Using the Contacts feature of your C810, you can manage all the phone information you need. There are
many options for adding contacts, retrieving contacts, and managing the information for each contact.
many options for adding contacts, retrieving contacts, and managing the information for each contact.
Create a new contact
To enter a new contact manually, without having the caller on the phone, you will use the Contacts selection
from the home screen.
from the home screen.
1. In the Home screen, press [Start]
2. Select Contacts using the Navigation Key and press OK.
2. Select Contacts using the Navigation Key and press OK.
3. Press the New left soft key
[New].
4. Enter information for the new contact.
5. Press [Done].
5. Press [Done].
TIP: If someone who isn't in your list of contacts calls you or sends you a message, you can create a contact
from Call History or from the message by pressing Menu > Save to Contacts.
Beam a contact
It is possible to use your phone to send a contact to another device such as Bluetooth radio. This is called
“beaming” your contact. A list of devices will appear when you’ve selected Beam.
“beaming” your contact. A list of devices will appear when you’ve selected Beam.
1. In the Home screen, press the left soft key
[Start].
2. Select
Contacts.
3. Select the contact to beam.
4. Press the right soft key
[Menu]
5. Select Send Contact then select Beam and press OK.
6. On the list that appears, scroll to the name of the device you want to beam the contact.
7. To beam using Bluetooth, ensure that both Bluetooth radios are turned on and that Bluetooth is
6. On the list that appears, scroll to the name of the device you want to beam the contact.
7. To beam using Bluetooth, ensure that both Bluetooth radios are turned on and that Bluetooth is
discoverable on the receiving device.
8. Press
Beam.
9. Status information displays, indicating the name of the device to which the phone is beaming, and
whether the beaming process is pending, finished, or was unsuccessful.
If you want to receive a contact by beam, you have to fallow steps.
1. In the Home screen, press left soft key
[Start].
2. Select Settings and press OK.
3. Select Connections and press OK.
4. Select Beam and press OK.
5. Check Receive incoming beams.
3. Select Connections and press OK.
4. Select Beam and press OK.
5. Check Receive incoming beams.
Call a contact from contact information
You can call a contact directly by selecting them from the Contacts page off the Home screen.
1. In the Home screen, press left soft key
[Start].
2. Select Contacts and press OK.
3. Select the contact to call and press OK.
4. Scroll to the phone number to dial.
3. Select the contact to call and press OK.
4. Scroll to the phone number to dial.