Pantech P2000 Manuale Utente

About your SIM card 

When you subscribe to your network operator, you receive a SIM 

(Subscriber Identity Module) card containing your registration information, 

PIN code, etc. 

Like a credit card, it should be kept secure and handled carefully. Do not 

bend, scratch or expose it to moisture. Avoid static electricity.   

To avoid corrupting your SIM card’s memory, always switch off your phone 

before removing or inserting your SIM card 

About your battery 

Your phone uses a Li-Ion battery. Make sure to use an authorized battery 

and charger only. For more details, please inquire at your nearest dealer. 

 

NOTE: Your phone is powered by a Lithium Ion (Li-Ion) battery. This means 

that, unlike other forms of battery technology, you can recharge your battery 

while some charge remains without reducing your phone’s autonomy due to 

the “battery memory effect” inherent in those technologies. 

 

Installing / removing SIM card and battery 

1. Remove the battery cover from the unit. To fit the 

battery cover, put it on the guide rail and push up. 

 

 

 

2. Insert the SIM card into the slot. The gold contacts of 

the SIM card should go against the metal contacts of 

the phone. Put the contacts of the battery into the hole 

located at the bottom of the unit insert and press the 

upper side of the battery until you hear the “click”. 

 

3. To remove the battery push the bottom of the battery to 

upwards (1) and remove (2) the battery. Push the SIM 

card in the arrow direction as shown. 

 

 

 

 

To charge your battery 

1. To charge, open the protective cover on the top left   

side and connect the charger adapter. The arrow on 

the charger has to face the top of the phone. 

 

2. To remove the adapter connection press the   

adapter’s side buttons(1) and pulling the adapter 

away (2).