Pantech p2020 Manuale Utente

Pagina di 77
 
 
 
SIM card and battery 
About your SIM card 
When you subscribe to your network operator, you receive a SIM 
(Subscriber Identity Module) card containing your registration information, 
PIN code, etc.  
Like a credit card, it should be kept secure and handled carefully. Do not 
bend, scratch or expose it to moisture. Avoid static electricity.  
To avoid corrupting your SIM card’s memory, always switch off your phone 
before removing or inserting your SIM card. 
About your battery 
Your phone uses a Li-Ion battery. Make sure to use an authorized battery 
and charger only. For more details, please inquire at your nearest dealer. 
Note: Your phone is powered by a Lithium Ion (Li-Ion) battery. Unlike other 
forms of battery technology, you can recharge your battery while some 
charge remains without reducing your phone’s autonomy due to the “battery 
memory effect” inherent in those technologies. 
 
Installing/removing SIM card and battery 
1.  Remove the battery cover from the unit.  
2.  To fit the battery cover, put it on the guide rail and push up. 
 
3.  Insert the SIM card into the slot. The gold contacts of the SIM card 
should go against the metal contacts of the phone. Put the connector of 
the battery into the hole located at the top of the unit and then insert and 
press the lower side of the battery until you hear the light click. Make 
sure you align the gold contacts at the battery end with contacts on the 
phone. If the contacts at the battery are not properly aligned, damage 
could occur to the phone and the battery. 
 
4.  To remove the battery push the bottom of the battery to upwards (1) and 
remove (2) the battery. Push the SIM card in the direction of the arrow 
as shown. 
 
To charge your battery 
1.  To charge, open the protective cover on the top right side and connect 
the charger adapter. Make sure you align the connector as the image. If 
not, it will damage the charging connector on the phone and will not 
charge. 
2.  To remove the adapter connection press the adapter’s side buttons(1) 
and pull the adapter away (2). 
 
Turning the phone on/off  
To turn on  
1.  Press and hold [
].