JVC KENWOOD Corporation 407601 Manuale Utente

9

FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by 

Kenwood Corporation.

Note:  If set up by your dealer, your transceiver may use the MDC-200 feature in place of 

FleetSync.  MDC-200 and FleetSync cannot be operated simultaniously.

A Selcall is a voice call to a particular station or to a group of stations.

n

1  Select your desired zone and channel.
2  Press the <B and C> keys to select the ID of the station you want to call, or 

enter a station ID using a DTMF keypad.

3  Press the microphone PTT switch and begin your conversation.

n

  If enabled by your dealer, an alert tone will sound and the LED will blink when 

a Selcall has been received.

  To respond to the call, press the PTT switch and speak into the microphone.

n

  An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.  

Each transceiver must have its own Fleet and ID number.

Note:  The ID range may be limited by programming.

1  Select your desired zone and channel.
2  Press and hold the key programmed as Paging Call for  second to transmit 

your PTT List ID, to request a call.

You can transmit pre-programmed status messages by pressing the keys 

programmed as Status 1 and Status 2.
Status messages are 2-digit codes ranging from 0 to 99 (80 ~ 99 are reserved 

for special messages), containing messages of up to 6 alphanumeric characters.

If a GPS unit (NMEA-083 format) is installed on your transceiver, you can press 

the key programmed as Send the GPS data to send your location data.