Wi Lan Inc EB03 Manuale Utente
Configuration
60
AWE 120-24 Installation & Configuration Guide
2.
Select Link Monitor Period and press
Enter
. The data field highlights.
3.
Type the period setting (0=OFF, 1-10000)
4.
Press
Enter
. The test starts as soon as a non-zero value is entered.
5.
Press
Esc
to exit to the Main Menu.
Setting Maximum Remote Distance (Base Station Only)
The Maximum Remote Distance setting is used to optimize dynamic polling by compensating for time delays
caused by long distances between the sending unit and the receiving unit.
caused by long distances between the sending unit and the receiving unit.
➧
To set the maximum remote distance
1.
From the Main Menu, select RF Station Configuration and press
Enter
. The RF Station
Configuration menu is displayed.
2.
Select Maximum Remote Distance and press
Enter
. The data field highlights.
3.
Press the arrow keys to set the distance of the furthest remote unit (5 km increments are used).
4.
Press
Enter
.
5.
Press
Esc
to exit to the Main Menu.
! Important
In the base unit, the Maximum Remote Distance should always be set to the
distance between the base and the farthest remote.
RF Station Configuration
Operating Mode Normal Mode
RF Transmit Status unblocked
Link Monitor Period (0=OFF, 1-10000) 0
Test Mode Timer (1-1000)mins 5
Base Station Only Parameters
Maximum Remote Distance -> 5 Km
Link Monitor Remote Station Rank 1
Remote Station Only Parameters
Throttle Enable off
Throttle Level (1-100) 10 (640 kps)
Link Monitor/Output Power Dynamic Output Power
User Output Power Adjust Ceiling -5 dB
Signal Margin (6-31) dB 6
Current Output Power Level Adjust -21