Wi Lan Inc EB03 Manuale Utente
RF Station Configuration
JUL 2001 Rev 03
67
Setting Signal Margin (Remote Station Only)
The signal margin is the output transmit power (measured in dB) desired for a remote unit with respect to
the base station’s receive sensitivity threshold). This value is used by Output Power Control test modes to
set the transmit power.
the base station’s receive sensitivity threshold). This value is used by Output Power Control test modes to
set the transmit power.
For example, if set to 10 dB, an Output Power Control test mode will attempt to adjust the output transmit
power to a level at which the received signal at the base station is 10 dB greater than receiver sensitivity
threshold.
power to a level at which the received signal at the base station is 10 dB greater than receiver sensitivity
threshold.
➧
To set the signal margin
1.
From the Main Menu, select RF Station Configuration and press
Enter
. The RF Station
Configuration menu is displayed.
2.
Select Signal Margin and press
Enter
. The data field highlights.
3.
Enter the ceiling value (from 6 to 31 dB) and press Enter.
4.
Press
Esc
to exit to the Main Menu.
RF Station Configuration
Operating Mode Normal Mode
RF Transmit Status unblocked
Link Monitor Period (0=OFF, 1-10000) 0
Test Mode Timer (1-1000)mins 5
Base Station Only Parameters
Maximum Remote Distance 5 Km
Link Monitor Remote Station Rank 1
Remote Station Only Parameters
Throttle Enable off
Throttle Level (1-100) 10 (640 kps)
Link Monitor/Output Power Dynamic Output Power
User Output Power Adjust Ceiling -5 dB
Signal Margin (6-31) dB 6
Current Output Power Level Adjust -21