Wi Lan Inc EB03 Manuale Utente
Configuration
72
AWE 120-24 Installation & Configuration Guide
Setting the Station Type
Each unit must be set up as either a base station or a remote station. In a given system there is only one base
station, but there can be numerous remote stations. (A base station can also be set up as a repeater base.)
You define the unit as a base station or remote unit by setting the Station Type.
station, but there can be numerous remote stations. (A base station can also be set up as a repeater base.)
You define the unit as a base station or remote unit by setting the Station Type.
➧
To set the station type
1.
From the Main Menu, select Radio Module Configuration and press
Enter
. The Radio Module
Configuration menu is displayed.
2.
Select Station Type and press
Enter
. The data field highlights.
3.
Scroll to select the Station Type (base station or remote unit).
4.
Press
Enter
. The new setting is displayed in the "New" column.
5.
Select Reboot New RF Configuration and press
Enter
. The unit reboots and the AWE 120-24
Login menu is displayed. The unit now runs using the "Current" station type for the amount of time
specified by the Current Test Minutes.
specified by the Current Test Minutes.
6.
To save the current setting(s) to flash memory, log in, go to the Main Menu, and select Radio Module
Configuration,
Configuration,
Save Current Config to Flash. See
7.
Press
Esc
to exit to the Main Menu.
Radio Module Configuration
New Current Flash
Station Type Remote Unit Remote Unit Remote Unit
Station Rank (1-1000) 1 1 1
Center Frequency 2.4400 GHz 2.4400 GHz 2.4400 GHz
Security Password 1 (Hex) 1 1 1
Security Password 2 (Hex) 10 10 10
Security Password 3 (Hex) 100 100 100
Security Password 4 (Hex) 1000 1000 1000
Security Password 5 (Hex) 10000 10000 10000
Scrambling Code (Hex) 0 0 0
Acquisition Code (0-15) 0 0 0
Config Test Minutes (1-120) 30 30 30
Tx Power Level Adjust -> 0 dB 0 dB 0 dB
Base Station Only Parameters
Repeater Mode off off off
System Symmetry Type Asymmetric Asymmetric Asymmetric
Dynamic Polling Level (1-100) 1 1 1
Remote Station Only Parameters
Remote Unit RF Group (0-63) 0 0 0
Reboot New RF configuration Press Enter to Execute
Save Current Config to Flash Press Enter to Execute