Yaesu Musen Co. Ltd. 20311X50 Manuale Utente
FT-950
Operating Manual
Vertex Standard Co., Ltd.
93
will appear in the display, and you will hear the results in the sidetone, but no RF
energy will be transmitted.
energy will be transmitted.
Note: You may adjust the monitor level using the [MONI] knob.
On-The-Air CW Message Playback
1. Press the [BK-IN] button to enable transmission. Either Full- or Semi-break-in
On-The-Air CW Message Playback
1. Press the [BK-IN] button to enable transmission. Either Full- or Semi-break-in
will be engaged, depending on the setting of Menu item “043 A1A BK-IN.”
2. Press the FH-2’s [1] ~ [5] key, depending on which CW Memory Register’s message
you wish to transmit. A “PLAY” icon will appear in the display, and transmit the
programmed message on the air.
programmed message on the air.
Note: If you subsequently decide to use the “Message Memory” technique for memory
storage, please note that the contents of a message stored using text input will not be
transferred over when you select “Message Memory technique” on a particular memory
register (the Menu Mode Setting is set to “tyP2”).
Decrementing the Contest Number
Use this process if the current contest number gets slightly ahead of the actual number
you want to send (in case of a duplicate QSO, for example).
Press the FH-2’s [DEC] key momentarily. The current Contest Number will be reduced
by one. Press the FH-2’s [DEC] key as many times as necessary to reach the desired
number. If you go too far, use the “Contest Number Programming” technique desired
previously.
storage, please note that the contents of a message stored using text input will not be
transferred over when you select “Message Memory technique” on a particular memory
register (the Menu Mode Setting is set to “tyP2”).
Decrementing the Contest Number
Use this process if the current contest number gets slightly ahead of the actual number
you want to send (in case of a duplicate QSO, for example).
Press the FH-2’s [DEC] key momentarily. The current Contest Number will be reduced
by one. Press the FH-2’s [DEC] key as many times as necessary to reach the desired
number. If you go too far, use the “Contest Number Programming” technique desired
previously.
FM Mode Operation
Basic Operation
1. Press the [AM/FM] button several times, until the “FM” icon will appear in the
1. Press the [AM/FM] button several times, until the “FM” icon will appear in the
display, to select the FM operating mode.
2. Rotate the Main Tuning Dial knob to select the desired operating frequency.
Pressing the microphone’s [UP] or [DWN] button will cause frequency change in 5
kHz steps.
kHz steps.
3. Press the microphone’s PTT switch (or press the front panel [MOX] button) to
transmit. Speak into the microphone in a normal voice level. Release the PTT or
[MOX] switch to return to receive.
[MOX] switch to return to receive.
4. Adjustment of the microphone gain may be accomplished in two ways. At the
factory, a default level has been programmed that should be satisfactory for most