Yaesu Musen Co. Ltd. VX-1210 Manuale Utente

1

(1)  POWER Switch

 

Turn this knob clockwise (straight down) to turn the radio on. Counterclockwise

rotation will turn the radio off.

 

(2)  SEL Knob

 

This is 20-position detended rotary switch selects the memory channels or tunes

the operating frequency.

 

(3)  VOL Knob

 

This control adjusts the audio volume level. Clockwise rotation increases the

volume level.

 

(4)  CLAR Knob

 

This control allows you to offset the receiving frequency from that originally

displayed (and used for transmission) frequency by up to 200 Hz in 10 Hz/step

(SSB, CW, and DATA mode), or up to 400 Hz in 20 Hz step (AM mode).

 

(5)  GND Terminal

 

If an earth ground connection point is available at the operating site, this terminal

may be connected to it to provide improved performance and safety.

 

(6)  ANT Jack

 

This jack accepts the 50

Ω

 antenna. If an optional antenna tuner is installed, the

optional whip antenna can be connecting to this connector directly. Use only type

PL-259 (type M) plug.

 

(7)  SQL Switch

 

Turn this switch to  “upper” position to keep the receiver quiet until a signal is

received. Turn this switch to “lower” position to “open” the noise squelch manually,

allowing you to listen for very weak signals.

 

This switch function can be customized, via programming by your dealer. See page

XX for details regarding the available feature.

 

(8)  LAMP Switch

 

Turn this switch to “upper” position to illuminate the LCD lamp continuously. To

disable the LCD lamp, turn this switch to “lower” position.

 

This switch function can be customized, via programming by your dealer. See page

XX for details regarding the available feature.

 

(9)  LCD (Liquid Crystal Display)

 

Display the current operating channel.

 

(10)  LED Indicator

This LED indicates the current status of the transceiver.

Glows Green: Busy Channel (or Squelch off)

Glows Yellow: Transmission in progress

Blinking Yellow:

Blinking Red: Battery voltage is nearing depletion. Prepare to replace the battery.

Glows Red: Battery voltage is critically low. Replace the battery immediately.