Yaesu Musen Co. Ltd. VXA-700 Manuale Utente
FCC ID: K66VXA-700
Operating Manual
Vertex Standard Co., Ltd.
1
VXA-700 Operating Manual
VXA-700 Operating Manual
VXA-700 Operating Manual
VXA-700 Operating Manual
Important Notice!
Important Notice!
Important Notice!
Important Notice!
FCC RF Exposure Compliance Requirements for Occupational Use Only:
This Radio has been tested and complies with the Federal Communications Commission
(FCC) RF exposure limits for Occupational Use/Controlled exposure environment. In
addition, it complies with the following Standards and Guidelines:
FCC RF Exposure Compliance Requirements for Occupational Use Only:
This Radio has been tested and complies with the Federal Communications Commission
(FCC) RF exposure limits for Occupational Use/Controlled exposure environment. In
addition, it complies with the following Standards and Guidelines:
FCC 96-326, Guidelines for Evaluating the Environmental Effects of Radio-
Frequency Radiation.
Frequency Radiation.
FCC OET Bulletin 65 Edition 97-01 (1997) Supplement C, Evaluating Compliance
with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic
Fields.
with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic
Fields.
ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human
Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of
Potentially Hazardous Electromagnetic Fields - RF and Microwave.
Potentially Hazardous Electromagnetic Fields - RF and Microwave.
This radio is NOT approved for use by the general population in an uncontrolled
environment. This radio is restricted to occupational use, work related operations
only where the radio operator must have the knowledge to control its RF exposure
conditions.
environment. This radio is restricted to occupational use, work related operations
only where the radio operator must have the knowledge to control its RF exposure
conditions.
When transmitting, hold the radio in a vertical position with its microphone 1 to 2
inches (2.5 to 5 cm) away from your mouth and keep the antenna at least 1 inch (2.5
cm) away from your head and body.
inches (2.5 to 5 cm) away from your mouth and keep the antenna at least 1 inch (2.5
cm) away from your head and body.
The radio must be used with a maximum operating duty cycle not exceeding 50%,
in typical Push-to-Talk configurations.
DO NOT transmit for more than 50% of total radio use time (50% duty cycle).
Transmitting more than 50% of the time can cause FCC RF exposure compliance
requirements to be exceeded.
The radio is transmitting when the red LED on the top of the radio is illuminated.
You can cause the radio to transmit by pressing the P-T-T button.
in typical Push-to-Talk configurations.
DO NOT transmit for more than 50% of total radio use time (50% duty cycle).
Transmitting more than 50% of the time can cause FCC RF exposure compliance
requirements to be exceeded.
The radio is transmitting when the red LED on the top of the radio is illuminated.
You can cause the radio to transmit by pressing the P-T-T button.
Always use Vertex Standard authorized accessories.
NOTICE
NOTICE
NOTICE
NOTICE
There are no user-serviceable points inside this transceiver. All service jobs must be
referred to your Authorized Service Center.
referred to your Authorized Service Center.