Belkin International Inc. F5D52314 Manuale Utente
29
28
Alternate Setup Method
29
28
Alternate Setup Method
Setting your Connection Type if you are a Telstra
®
BigPond User
[Australia Only] Your user name and password are provided to you
by Telstra BigPond. Enter this information below. Choosing your state
from the drop-down menu
by Telstra BigPond. Enter this information below. Choosing your state
from the drop-down menu
(6)
will automatically fill in your login server
IP address. If your login server address is different than the one
provided here, you may manually enter the login server IP address by
placing a check in the box next to “User decide login server manually”
provided here, you may manually enter the login server IP address by
placing a check in the box next to “User decide login server manually”
(4)
and type in the address next to “Login Server”
(5)
. When you
have entered all of your information, click “Apply Changes”
(7)
.
After you apply the changes, the “Internet Status” indicator will read
“connection OK” if your Router is set up properly.
“connection OK” if your Router is set up properly.
(1) Select your State
Select your state from the drop-down menu
(6)
. The “Login Server”
box will automatically be filled in with an IP address. If for some
reason this address does not match the address that Telstra has
given you, you can manually enter the login server address. See “User
decide login server manually”
reason this address does not match the address that Telstra has
given you, you can manually enter the login server address. See “User
decide login server manually”
(4)
.
(2) User Name
Provided by your ISP. Type in your user name here.
(3) Password
Type in your password and retype it into the “Retype Password” box
to confirm it.
to confirm it.
(4) User decide login server manually
If your login server IP address is not available in the “Select Your
State” drop-down menu
State” drop-down menu
(6)
, you may manually enter the login server
IP address by placing a check in the box next to “User decide login
server manually” and type in the address next to “Login Server”
server manually” and type in the address next to “Login Server”
(5)
.
(1)
(7)
(2)
(3)
(4)
(5)
(3)
(4)
(5)
(6)