Belkin International Inc. F5D8630-4 Manuale Utente
47
46
Manually Configuring your Router
47
46
Manually Configuring your Router
Setting WPA (with radius server) Settings
If your network uses a radius server to distribute keys to the clients,
use this setting.
use this setting.
1.
From the “Security Mode” drop-down menu, select
“WPA—Radius server)”.
“WPA—Radius server)”.
2.
For Encryption Technique, select “TKIP” or “AES”. This setting
will have to be identical on the clients that you set up
will have to be identical on the clients that you set up
3.
Enter the IP address of the radius server into the “Radius
Server” fields.
Server” fields.
4.
Enter the radius key into the “Radius Key” field.
5.
Enter the key interval. Key interval is how often the keys are
distributed (in packets).
distributed (in packets).
6.
Click “Apply Changes” to finish. You must now set all clients to
match these settings.
match these settings.
Configuring your Belkin Wireless G Network Cards to
Use Security
Use Security
Please Note:
This section provides information on how to configure
your Belkin Wireless G Network Cards to use security.
At this point, you should already have your Wireless Router or access
point set to use WPA or WEP. In order for you to gain a wireless
connection, you will need to set your wireless notebook card and
wireless desktop card to use the same security settings.
At this point, you should already have your Wireless Router or access
point set to use WPA or WEP. In order for you to gain a wireless
connection, you will need to set your wireless notebook card and
wireless desktop card to use the same security settings.