Belkin International Inc. F8V3080-B Manuale Utente
17019_P74456-C_F8V3080_TuneCast_II_FM_Transmitter_Manual 120607 HA.doc
TuneCast® II Mobile FM Transmitte
r
SETUP INSTRUCTIONS
1.
Open the battery cover on your TuneCast II Mobile FM Transmitter. Install the included AAA batteries and replace
the battery cover.
the battery cover.
2.
Plug the 3.5mm connector into your iPod player or other portable music device.
3.
The AUTO ON feature will power on the FM Transmitter when the unit detects an input signal. Your TuneCast’s
“AUTO ON/OFF” feature uses your audio player’s volume level to automatically power on and off. For best results,
keep your player set at a medium volume level.
NOTE: Setting your device volume very low may cause the TuneCast to turn off, even if the audio player is on. You
can also press and hold both ▲ and ▼ buttons simultaneously for two seconds to turn on the unit. To turn off the
unit, press and hold both buttons simultaneously again for two seconds.
Note: To conserve power, the TuneCast will automatically turn off when there is no input audio signal for 60 seconds
+/- 10 seconds.
“AUTO ON/OFF” feature uses your audio player’s volume level to automatically power on and off. For best results,
keep your player set at a medium volume level.
NOTE: Setting your device volume very low may cause the TuneCast to turn off, even if the audio player is on. You
can also press and hold both ▲ and ▼ buttons simultaneously for two seconds to turn on the unit. To turn off the
unit, press and hold both buttons simultaneously again for two seconds.
Note: To conserve power, the TuneCast will automatically turn off when there is no input audio signal for 60 seconds
+/- 10 seconds.
4.
Tune your car or home stereo frequency to a channel with a weak broadcast signal. The ideal channel is one that is
not broadcasting a radio program, or is doing so weakly. To identify the best available frequencies in your area, visit
www.belkin.com/mybestfm.
not broadcasting a radio program, or is doing so weakly. To identify the best available frequencies in your area, visit
www.belkin.com/mybestfm.
5.
Press the ▲ or ▼ button on the TuneCast to select the transmission frequency chosen in step 4, on your car or
home stereo, for broadcast. Press and hold either button for fast-forward or backward tuning.
home stereo, for broadcast. Press and hold either button for fast-forward or backward tuning.
6.
To memorize a specific frequency (four stations maximum) for easy selection:
a. Select the desired frequency using the ▲ or ▼ buttons.
b. Press and hold the “mem” (memory) button for two seconds. The icon M1 will blink; then release it.
c. Press the ▲ or ▼ button to select one of the memory slots M1, M2, M3, or M4 for storage. The active
memory slot icon will blink.
d. Press the “mem” button again to store the frequency and return to normal operation mode.
e. In operation mode, pressing the “mem” button will toggle among the four memory slots to retrieve the
memorized frequency.
b. Press and hold the “mem” (memory) button for two seconds. The icon M1 will blink; then release it.
c. Press the ▲ or ▼ button to select one of the memory slots M1, M2, M3, or M4 for storage. The active
memory slot icon will blink.
d. Press the “mem” button again to store the frequency and return to normal operation mode.
e. In operation mode, pressing the “mem” button will toggle among the four memory slots to retrieve the
memorized frequency.
NOTE: When there is no key press for a duration of 10 seconds, the TuneCast will return from memory mode to operation
mode.
mode.
7.
Adjust the volume on your MP3 player or other audio source to a medium level.
8.
Adjust the volume of your FM radio to the desired listening level.*
Mobile Power Cord Included for Extra Power
Connect one end of the cable into the DC port located on the bottom of the FM Transmitter. Plug the other end of the
cable into the cigarette lighter port in your car. Once the cable is plugged into the FM Transmitter, the unit will shut off.
You will need to manually turn on the unit. NOTE: This cable will NOT charge the TuneCast II Mobile FM Transmitter. It
only provides power in order to preserve battery life while in the car.
For best results:
cable into the cigarette lighter port in your car. Once the cable is plugged into the FM Transmitter, the unit will shut off.
You will need to manually turn on the unit. NOTE: This cable will NOT charge the TuneCast II Mobile FM Transmitter. It
only provides power in order to preserve battery life while in the car.
For best results:
•
Try to keep the FM Transmitter close to the antenna of your FM radio. While the FM Transmitter often works at
distances of 30 feet or more, a distance of 10 feet or less will minimize interference and provide the strongest
signal.
distances of 30 feet or more, a distance of 10 feet or less will minimize interference and provide the strongest
signal.
•
Keep fresh batteries in the FM Transmitter. When the batteries become very low, the transmission strength will
weaken.
weaken.
*Due to characteristics of FM transmission, you will experience better sound quality by adjusting the volume on your
home or car stereo when necessary, and by leaving your iPod or other portable music player volume at a medium level.
home or car stereo when necessary, and by leaving your iPod or other portable music player volume at a medium level.
INFORMATION
FCC Statement
Declaration of Conformity with FCC Rules for Electromagnetic Compatibility
We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that
the product:
F8V3080
to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
Deleted: 17019_P74456-
C_F8V3080_TuneCast_II_FM_Transmitt
er_Manual 120607
C_F8V3080_TuneCast_II_FM_Transmitt
er_Manual 120607
Formatted:
Default Paragraph Font,
Font: (Default)
HelveticaNeue-Roman, 8 pt, Font
color: Custom Color(RGB(39,37,37))
HelveticaNeue-Roman, 8 pt, Font
color: Custom Color(RGB(39,37,37))
Formatted:
Font: (Default)
HelveticaNeue-Roman, 8 pt, Font
color: Custom Color(RGB(39,37,37))
color: Custom Color(RGB(39,37,37))
Formatted:
Default Paragraph Font,
Font: (Default)
HelveticaNeue-Roman, 8 pt, Font
color: Custom Color(RGB(39,37,37))
HelveticaNeue-Roman, 8 pt, Font
color: Custom Color(RGB(39,37,37))
Formatted:
Font: (Default)
HelveticaNeue-Roman, 8 pt, Font
color: Custom Color(RGB(39,37,37))
color: Custom Color(RGB(39,37,37))
Formatted:
Default Paragraph Font,
Font: HelveticaNeue-Roman, 8 pt,
Font color: Custom
Color(RGB(39,37,37))
Font color: Custom
Color(RGB(39,37,37))
Formatted:
Font:
HelveticaNeue-Roman, 8 pt, Font
color: Custom Color(RGB(39,37,37))
color: Custom Color(RGB(39,37,37))
Formatted:
Default Paragraph Font,
Font: HelveticaNeue-Roman, 8 pt,
Font color: Custom
Color(RGB(39,37,37))
Font color: Custom
Color(RGB(39,37,37))
Deleted:
NOTE: